Manual Garmin BabyCam (page 6 of 10) (English)

629013

Zoom out

Zoom in

1/10

You should place the clamp and insert as close to the

headrest as possible without blocking the camera view by

any portion of the headrest.

Close the bolt

, and turn the knob

clockwise until the

clamp is tight.

TIP:

For larger headrest posts, you may need to loosen the

knob to close the bolt.

The clamp should not slide on the post when tightened. If the

clamp does slide, you should use a thicker rubber insert.

Lower the headrest until the camera is at the desired height.

NOTICE

The headrest must lock into the seat after the camera is

installed. If the headrest does not lock, the camera should not

be installed on this headrest.

Adjusting the Camera Position Using the Standard

Headrest Mount

You can adjust the camera angle and orientation to include the

optimal area in the video frame. While adjusting the camera, it

can be helpful to view the video feed on your navigation device

for reference (Viewing babyCam Video, page 4).

• To point the camera left or right, loosen the clamp by turning

the knob

counterclockwise, and rotate the clamp on the

headrest post.

• To level the camera orientation, loosen the threaded ring

by turning it one full turn counterclockwise, and turn the

camera until the subject is level in the video frame.

• To point the camera up or down, loosen the thumbscrew

by turning it counterclockwise, and tilt the camera up or

down.

After you are finished adjusting the camera position, you should

verify the knob, threaded ring, and thumbscrew are fully

tightened.

Extension Arm Accessory

The optional extension arm accessory allows you to install the

camera on an adjustable headrest that overhangs the top of the

seat. The arm extends around the overhanging portion of the

headrest and holds the camera in front of the headrest. Go to

garmin.com

/babycam

to purchase mounting accessories.

Assembling the Mount and Extension Arm for an

Overhanging Headrest

You should assemble the mount and extension arm before you

mount the camera on the headrest.

Place the mounting connector

on the clamp

You should align the mounting connector as shown in the

illustration.

Place the threaded ring

over the mounting base, and turn it

clockwise to tighten.

Insert the extension arm

into the mounting base and

secure it using the thumbscrew

Mounting the Camera on an Overhanging Headrest

Before you mount the camera on an overhanging headrest, you

should assemble the mount and extension arm.

Raise the headrest from the vehicle seat to expose the

headrest posts.

Place one rubber insert

around the headrest post.

NOTE:

Two sizes of rubber inserts are included. You should

use the rubber insert that fits easily and tightly onto the post.

Place the clamp

around the rubber insert.

You should place the clamp and insert close to the headrest.

Close the bolt

, and turn the knob

clockwise until the

clamp is tight.

The clamp should not slide on the post when tightened. If the

clamp does slide, you should use a thicker rubber insert.

TIP:

You can adjust the depth of the extension arm by

rotating the clamp on the post.

Place the camera onto the extension arm

, and secure it

using a thumbscrew

2 Installation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin BabyCam in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin BabyCam

Garmin BabyCam User Manual - German - 12 pages

Garmin BabyCam User Manual - Dutch - 12 pages

Garmin BabyCam User Manual - French - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin BabyCam Manual

Product: