724668
16
Zoom out
Zoom in
Previous page
1/38
Next page
45cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. YR-CS4500S • 04/2016 • 51488
(toll free)
14
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
45cc Petrol Chainsaw
MODEL: №. YR-CS4500S • 04/2016 • 51488
8. Prior to fitting the chain drive side cover (22),
you need to ensure the chain tensioner pin (29)
will locate correctly in the guide bar (18). Before
fitting the chain drive side cover (22), rotate
the tool free chain tensioning dial (black)(21)
in an anti clockwise direction (Fig J) until the
tensioning pin (29) is fully to the right hand side
(Fig K).
9. Fit the chain drive side cover (22) over the two
threaded studs. The chain tensioner pin (29) will
now sit on the guide bar (19) and needs to be
moved to locate in the guide bar (18).
10. Applying a downward pressure with one hand
and support the black locking lever (23) so it
does not rotate. (Left hand in Fig L), rotate the
tool free chain tensioning dial (black)(21) in a
clockwise direction (Right hand in Fig L). The
chain tensioner pin (29) will move forward and
suddenly drop into the hole in the guide bar (18).
Ensure the chain drive side cover (22) has fully
dropped into position and is sitting on the bar.
11. Rotate the tool free locking dial/lever (23) in a
clockwise direction ensuring the chain drive side
cover (22) is being clamped to the chainsaw.
DO NOT fully tighten. Tighten only to the point
where the chain drive side cover (22) is just
holding the guide bar (18).
12. To tension the chain (19), hold the tool free
locking dial (23) with one hand so it does not
rotate, and then rotate the tool free tensioning
dial (black)(21) in a clockwise direction until the
chain has firmed up on the guide bar (18). The
chain (19) should be able to be lifted by approx
5mm (Fig M).
13. To complete the chain fitting task, fully tighten
the tool free locking dial (23) by rotating firmly
in a clockwise direction until secure, and then
slide the tool free locking lever (23) back to the
central position.
NOTE: the chain (19) should be able to rotate
around the guide bar (18) when assembled
correctly.
Assembly
L.
M.
5MM
K.
J.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline YR-CS4500S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline YR-CS4500S in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info