724673
17
Zoom out
Zoom in
Previous page
1/38
Next page
37cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. 50712 11/2015 WLCS38A-375 (toll free)
AFTER SALES SUPPORT
(toll free)
37cc Petrol Chainsaw
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. 50712 • 11/2015 • WLCS38A-375
15
12. Rotate the chain (19) a few times to ensure the
chain (19) is free to rotate the drive sprocket
(28) and is correctly engaged on the sprocket.
Check the tension of the chain. The chain
should be fully seated in the bar channel. DO
NOT over tighten. The chain (19) should be
able to be lifted at least 5mm in the centre of
the bar. (Fig L)
13. Using the supplied spark plug / screwdriver
wrench (32), firmly tighten the chain drive side
cover nut/s (23) on the chain drive side cover
(22) in a clockwise direction. (Fig M)
CAUTION: A new chain (19) will stretch
after just a few minutes of use. Check and,
if necessary, re-adjust the chain tensioning
screw (21). A loose chain causes rapid wear to
both the chain (19) and the guide bar (18) and
could derail causing a major safety hazard.
NOTE: Do not make ANY adjustments with the chainsaw engine running.
To tighten a loose chain (19), loosen the chain drive side cover lock nuts (23),
then using the supplied screwdriver (33), turn the chain tensioning screw
(21) clockwise to tighten the chain (19).
Do not over tighten, the chain (19) should be able to lift 5 mm from the
middle of the bar.
Retighten the chain drive side cover nuts (23) firmly using the supplied spark
plug / screwdriver wrench (32).
Run the chainsaw for approximately 30 sec and then turn the chainsaw off.
Retest the chain.
M.
TIGHTEN
LOOSEN
L.
5MM
Assembly
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline WLCS38A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline WLCS38A in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info