724673
16
Zoom out
Zoom in
Previous page
1/38
Next page
37cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL: №. 50712 • 11/2015 • WLCS38A-375 (toll free)
14
AFTER SALES SUPPORT
(toll free)
37cc Petrol Chainsaw
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. 50712 11/2015 WLCS38A-375
8. Once the chain (19) is loosely in position
around the guide bar (18), and ensuring the
links are located within the bar guide channel
(Fig G), locate the chain tensioning pin (29)
in the bottom hole in the guide bar (18) by
moving the bar inward or outwards.
NOTE: If the chain tensioning pin (29) does
not locate with the bottom hole in the bar
guide (18), adjust the chain tensioning screw
(21) until the chain tensioning pin (29) is in the
correct positon to locate. (Fig H)
9. Tighten the chain (19) onto the guide bar (18)
by adjusting the chain tension screw (21) in
a clockwise direction until the chain (19) just
touches the bottom edges of the guide bar
(18). (Fig I)
10. Fit the chain drive side cover (22) over the
clutch / brake assembly (35) whilst aligning
the 2 threaded studs with the 2 hole recesses
in the chain drive side cover (22) (Fig J).
NOTE: Check the position of the front guard /brake lever (12) and ensure
it is in the full forward position. (Fig K)
11. Secure the chain drive side cover nut/s (23) finger tight. Check again the
cover is flat on the surface of the bar.
I.
H.
TIGHTEN
LOOSEN
J. K.
BRAKE
ON
BRAKE
OFF
G.
Assembly
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline WLCS38A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline WLCS38A in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info