724683

Gardenline PM99CC Manual

16
Zoom out
Zoom in
Previous page
1/28
Next page
S U A
1800 909 909
www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT
PM98CC
16
Attaching the handles
It is necessary to attach both the lower handle and
handle bars.
1. To attach the lower handle (2), first use a spanner
(not supplied) to remove the 4 bolts.
2. Place the lower handle in position and replace the 4 bolts.
Use a spanner to retighten the nuts.
3. To attach the handle bar (1), first remove
the two handle bar locking knobs (12).
4. Position the handle bar over the lower
handle and insert the two locking knobs.
Tighten to secure the handles together
and in place.
Cutting height adjustment
WARNING: Stop the engine and unplug the spark plug before any repairs or
maintenance operations.
The mower has one lever to easily adjust the cutting height.
There are 7 height settings.
1. To decrease the cutting height pull the height adjustment lever
(6) out and move it up a notch, towards the handlebar.
2. To increase the cutting height pull the lever out and move it
down a notch, towards the engine.
Note. If you are unsure of which cutting height to use, begin with a high setting
and trial a small section of lawn, then check the appearance of the lawn. Then
readjust if necessary
Checking the oil
1. Move the lawn mower to a level surface and clean around
the oil filler cap (8) .
2. Remove the oil filler cap with dipstick and wipe it with a
clean cloth. Replace it and retighten the cap.
5
Instructions
1
2 3
… 16 …


Need help? Post your question in this forum.

Forumrules
1

Forum

gardenline-pm99cc

Reset search

  • My mower is still working very well, despite being around ten years old. Mostly starts first pull. But, its weak point is the pressed steel frame. It is rusting through corners and is cracked near welds in four places..... Any chance of getting a new frame as a spare part and also a deflector chute when I don't want to collect clippings? Submitted on 27-9-2021 at 08:12

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PM99CC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PM99CC in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info