724641

Gardenline PM2006H Manual

18
Zoom out
Zoom in
Previous page
1/21
Next page
45cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 53942 • 09/2018 • PM2006H
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
45cc Petrol Chainsaw
MODEL: №. 53942 • 09/2018 • PM2006H
32 33
The chain teeth are extremely sharp and could
create a safety hazard if the bar cover (31) is not
tted. Furthermore, the bar cover (31) provides
protection to the chain cutting edge when the saw
is not in use (Fig AQ).
WARNING: The chain has sharp edges.
Use work gloves for safety.
Vents:
1 . Clean any dust away from the cooling vents as
clogged vents can cause overheating.
Servicing
• It is recommended once you rst use your product to get it serviced after
15 hours of use.
• From thereafter, service the product every 2 years, or every 50 hours of
use if frequently used.
Transportation and Storage
Always t the chain and bar cover (31) when the chainsaw is not in use.
It is recommended to drain BOTH fuel and oil from the chainsaw on the
completion of use, prior to storage or transportation.
Always sit the chainsaw on a surface where the leakage of oil will not be
a problem. The chainsaw is tted with an oil pump and there will be after
use an amount of oil in the oil channels inside the chainsaw, and also in the
chain and bar channel. This oil can spill on to the surface the chainsaw is
sitting as it drains from the above points.
Always store the chainsaw in a area safe away from the elements of the
environments, i.e. high humidity, wet locations, hot environments etc.
Storage area should also be out of reach of children of both the chainsaw,
mixing bottle and all accessories.
Store the chainsaw ensuring the bar cover securely covers the chain (20) and
guide bar (19).
The chainsaw should always be stored with the On/O switch (4) in the
‘STOP’ position and the chain brake (13) ON.
If the chainsaw is to be stored for a long period of time it is advisable to
apply a thin spray of oil over the chain (20), guide bar (19) and all exposed
metal parts.
The chainsaw should be thoroughly cleaned of all wood chips, dirt etc prior
to storage.
AQ.
Air Filter:
1. Remove the air lter cover by rotating the air
lter cover knob (16) in an anti - clockwise
direction until loose. Fully remove the knob and
plastic washer. Lift the cover away from the saw
housing (Fig AM).
2. Separate the air lter into its two parts (Fig AN)
and clean the lter material. Dry particles can
be removed by tapping on a hard surface. More
stubborn dirt may require washing out the air
lter (14) with warm soapy water and soft brush.
NOTE. BEFORE re assembly, ensure the lter
material is dry.
4. Re-assemble the two halves of the air lter (14).
Replace the air lter cover (15) and secure with
the air lter cover knob (16) and plastic washer.
Guide Bar:
1. Take o the guide bar (19) and maintain it by
removing any sawdust from the groove in the
guide bar (Fig AO).
2. Make sure that the oil port is not clogged. Oil
the nose sprocket at the tip of the guide bar (19)
(Fig AP).
3. Check for fuel and oil leakage and loose
fastenings, especially those securing the
handles and the guide bar (19).
If any defects are found, take the tool to an
authorised Service Agent.
4. A bar cover (31) is supplied with this chainsaw
and should be tted over the chain (20) and
guide bar (19) whenever the chainsaw is not
being used. This includes immediately after use,
transportation and service where possible.
AO.
AN.
A P.
Maintenance Maintenance
AM.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PM2006H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PM2006H in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info