724641
12
Zoom out
Zoom in
Previous page
1/21
Next page
45cc Petrol Chainsaw
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. 53942 • 09/2018 • PM2006H
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: help@powertoolsupport.com1800 909 909
45cc Petrol Chainsaw
MODEL: №. 53942 • 09/2018 • PM2006H
20 21
Fuelling the Chainsaw
WARNING: Always ensure the engine is
turned o before undertaking this task.
Never add fuel to a machine with a running or hot
engine. Move at least 15m away from the refuelling
site before starting engine.
Do not smoke when refuelling or operating the
chainsaw.
1. Rest the chainsaw on its side so the fuel tank (8) is
facing up, on the ground or a secure surface and
wipe any debris from around the fuel tank (8).
2. Unscrew the fuel tank cap (9) (anti clockwise
direction), and pour the fuel and oil mixture into
the tank with the aid of a funnel, to about 80% of
its capacity (Fig S).
NOTE: Be careful not to spill any mixture. If this
happens, wipe the spill with a clean rag.
3. Secure fuel tank cap (9) (Fig T).
Adding Chain Oil
WARNING: Always ensure the engine is
turned o before undertaking this task.
WARNING: Never start work unless the chain
(20) and guide bar (19) are lubricated.
1. Place the chainsaw on its side with the oil tank
cap (7) facing up. Unscrew and remove the oil
tank cap (7) (anti clockwise direction) (Fig U).
2. Using a funnel, ll the oil tank (6) to 80% capacity
with chain oil (Fig V).
3. Fasten the oil tank cap (7) and wipe up any oil
spillage.
WARNING: Do not start the engine whilst the
chainsaw hangs from one hand. This is very
dangerous as the chain (20) may come in
contact with your body and the starting action is not
controlled (Fig W).
S.
V.
Starting the Chainsaw
NOTE: This chainsaw is tted with a double action recoil starter (11).
This means the recoil starter only needs to be pulled at a steady medium
rate and not hard vigorous pulling.
Cold starting / Out of box starting
Please follow this procedure when starting the product for the very rst time,
or if the unit is coming out of storage to be used.
1. Fill the fuel and oil tanks respectively per previous instructions and ensure
both caps are secure. Remove the bar cover (31).
2. Turn the on/o switch (4) to the “On position (Fig X).
3. Make sure the front guard / chain brake (13) is on when starting for safety,
by pushing it rmly towards the nose of the chainsaw bar until a click is
heard (Fig Y). This ensures the chain wont start spinning upon starting.
4. Press the priming bulb (36) 4 times . You will see the priming bulb (36) ll
with fuel.
5 . Pull the combination choke control / throttle lock knob (10) (Also engaging
the throttle lock on) outwards (Fig Z).
U.
LOOSEN
Preparation Operation
T.
LOOSEN
TIGHTEN
TIGHTEN
Y.
BRAKE
ON
BRAKE
OFF
Z.
OUT
IN
X.
OFF
ON
W.
Operation
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PM2006H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PM2006H in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info