724679
12
Zoom out
Zoom in
Previous page
1/24
Next page
S U A 1800 909 909 www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT 43669
12
6. Screw the tubes together using the screws provided.
Check the intake cover. For using the blower vac as a blower,
the vac tubes should not be fitted, but the intake cover MUST
be closed and secured with the supplied screw.
The blower vac is now ready for use as a blower.
Note. The vac tubes and the collection bag are not required
for the blower operation.
Setting up for use as a vac
Assembly of the vac tubes
1. Align the lower vac tube and the vac tube
nozzle and slide the vac tube inside the vac
tube nozzle until it will enter no more.
2. Rotate the two tubes and lock them
together.
3. Fix the two tubes together with the supplied assembly screws.
Fitting the vac tube to the blower vac housing
1. Using a Phillips type screw driver loosen and remove the
single assembly screw
in the intake cover.
2. Open the intake cover
and insert the vac
tube so it fits inside
the round entry of
the vac housing. It is
important to locate
the square tab of the vac tube under and into the locating
keyway as the vac tube is fitted. (Refer to pic)
3. Secure the tube in place with the screw previously removed
from the inlet cover.
Instructions 5
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline PBV26CC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline PBV26CC in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info