724639

Gardenline MQE-3SPK Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
26cc 2-Stroke Hedge Trimmer
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. MQE-3SPK-560 • 43671 • 09/2018
(toll free)
AFTER SALES SUPPORT
(toll free)
26cc 2-Stroke Hedge Trimmer
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. MQE-3SPK-560 • 43671 • 09/2018
18 19
Operation Maintenance
Trimming Instructions
Before operating your unit, review ALL SAFETY PRECAUTIONS in this
manual.
1. WORKING POSITION. Maintain proper footing
and balance and do not overreach. Wear safety
goggles, ear mus, non-skid footwear and
rubber gloves when trimming. Hold the hedge
trimmer rmly in both hands and turn the hedge
trimmer ON. Always hold the hedge trimmer, as
shown in the illustrations, with one hand on the
rear handle and one hand on the front handle
(7). NEVER hold the hedge trimmer by the
protective guard (3).
2. TRIMMING NEW GROWTH. A wide, sweeping
motion, feeding the blade teeth through the
twigs is most eective.
A slight downward tilt of the blades (1), in the
direction of motion gives the best cutting.
(Fig H).
3. LEVEL HEDGES. To obtain level hedges, a piece
of string can be stretched along the length of the hedge as a guide.
CAUTION: Do not use the hedge trimmer for cutting stems greater than
24mm. Use the hedge trimmer only for cutting normal shrubbery found
around houses and buildings.
4. SIDE-TRIMMING HEDGES. Hold the trimmer as shown and begin at the
bottom and sweep up (Fig I).
Blade Maintenance
WARNING: Ensure the engine is switched o before undertaking all
maintenance work / tasks.
Your hedge trimmer should be stopped and oiled occasionally during use.
1. The cutting blades (1) are made from high quality, hardened steel and
with normal usage, they will not require resharpening. However, if you
accidentally hit a wire fence, stones, glass or other hard objects, you may put
a nick in the blades (1).
There is no need to remove this nick as long as it does not interfere with
the movement of the blade. If it does interfere, stop the engine and use a
sharpening stone to remove the nick.
2. If you drop the hedge trimmer, carefully inspect it for damage. If the
blades/s (1) is bent, the housing cracked, or handles broken or if you see any
other condition that may aect the hedge trimmer’s operation contact an
authorised service centre for repairs before using again.
3. Fertilisers and other garden chemicals contain agents greatly accelerate
the corrosion of metals. Do not store the hedge trimmer on or adjacent to
fertilisers or chemicals.
4. With the unit stopped, use only mild soap and a damp cloth to clean the
outside of the hedge trimmer. Never let any liquid get inside the tool; never
immerse any part of the hedge trimmer into a liquid.
H.
I.
Maintenance
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline MQE-3SPK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline MQE-3SPK in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info