724678
20
Zoom out
Zoom in
Previous page
1/24
Next page
S U A 1800 909 909 www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT 43670
20
9. With the spring fitted onto the shaft of the spool holder insert
the spool back into the holder. As you insert the spool, thread
the lines through the eyelets and pull firmly to disengage from
the notch in the spool.
Note. When inserting the spool into the housing, the spool
may need to be rotated slightly so as to locate into the
housing. Before the spool is fully inserted into the housing,
ensure the lines are free of the notches.
10.Once the spool is fully inserted and the lines are fully through
the eyelets, pull firmly on each line to disengage the lines from
the spool notches. Ensure the lines are fully clear of the spool
notches and the line is passing through the eyelets directly to
the spool.
11.To install the spool, line and housing, refer to ‘Fitting the
spool’ section of this manual.
Note. On start up test the operation of the bump feed to ensure the line feeds
correctly.
CAUTION. After changing the line spool, run the petrol line trimmer under
no load for at least a minute to make sure that the line and the tool are
both operating correctly. Use only the line spool as recommended by the
manufacturer.
WARNING. Never use steel threads and/or three teeth blade other than those
provided by the manufacturer. Always use tools in perfect condition, free of
damage.
WARNING. In high-speed rotation, parts could be projected at very high speed
and could involve serious injury and damages to persons and property.
Maintenance
Air filter
Accumulated dust in the air filter will reduce engine efficiency. Increase fuel
consumption and allow abrasive particles to pass into the engine. Remove the
air filter as often as necessary to maintain a clean condition.
• Removeltercover(12)bypressinginthesidesandliftingitoff.
• Lightsurfacedustcanreadilyberemovedbytappingthelter.
5
Instructions
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline LT26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline LT26 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info