724678
19
Zoom out
Zoom in
Previous page
1/24
Next page
S U A 1800 909 909 www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT 43670
19
Advancing the line manually
1.
Push the bump knob in while pulling on both lines to manually advance the line.
2. Release the bump knob and again pull on both lines to advance the line further.
3. If the line still does not advance remove the spool and check the lay of the line.
It may be twisted or trapped under over laying line.
Tips for cutting
WARNING. Beware of bystanders at all times
• Cutthegrasslikeyouareinacorridorabout1.5mwide.Movestepbystep,
moving the machine from left to right and vice-versa. Make sure at each step
that you are still well balanced on your feet
• Keepthelinetrimmertiltedtowardstheareabeingcut
• Letthetipofthelinedothecutting.Neverforcethespoolintouncutgrass.
• Runningthelineintofences,stoneandbrickwalls,curbs,andwoodcauses
extra line wear, even breakage.
Replacement of the cutting line
1. Stop the engine.
2. Put the petrol line trimmer on the floor in a way that the cutting line and spool
assembly (1) is facing up.
3. Open the cutting line and spool assembly (1) by holding the spool housing
firmly while rotating the bump knob anti-clockwise.
4. Remove the bump knob completely and remove the spool from the spool shaft.
Discard any short lengths of remaining cutting line.
5. Take a 4 metre length of Ø2mm line and halve it.
6. Place the half way mark of the line into the notch in the spool.
7. Wrap the line around the inside of the spool in an anti
clockwise direction (following the directional arrows on the
spool). Ensure the line is wrapped tightly and neatly.
8. When there is approximately 150mm of line left, lock one of
the lines into one of the line location notches in the spool head
and the other into the opposing notch.
5
Instructions
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline LT26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline LT26 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info