724678
10
Zoom out
Zoom in
Previous page
1/24
Next page
S U A 1800 909 909 www.globalpowerbrands.com email: help@globalpowerbrands.com
AFTER SALES SUPPORT 43670
10
Getting Started 4
Unpacking
Due to modern mass production techniques, it is unlikely that your petrol line
trimmer is faulty or that a part is missing. If you find anything wrong, do not
operate the tool until the parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Contents of carton
•Uppershaftwithmotor
•Lowershaft
•Safetyguardwithattachingboltandnut
•Hexkey
•Sparkplugwrench
•Bumpfeedspool
•Fuelmixingcanister
•Carrystrap
Assembly
Prior to use, it is necessary to assemble the safety guard (3) and cutting spool (1)
to the lower shaft (5b) and join the lower shaft (5b) to the upper shaft (5a).
Before assembling the line trimmer, ensure the protective plastic sleeve is
removed from the shaft of the trimmer.
Fitting the safety guard
Note. If the bump feed knob is fitted, remove the bump feed knob on the end
of the spindle prior to fitting the guard. To remove the bump feed knob, turn the
bump knob (18) in an anti-clockwise direction.
1. Slide the safety guard (3) on from the bottom of the lower
shaft (5b). The guard should slide upward so the bracket fitted
on the end of the shaft locates on the inside of the guard.
Ensure the holes of the safety guard line up with the fixing
mount holes on the shaft bracket.
Note. If you require replacement spool and line, this is
available for purchase. Please refer to page 23 for
further detail.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline LT26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline LT26 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info