724623
10
Zoom out
Zoom in
Previous page
1/19
Next page
51.7cc 2 Stroke Petrol Backpack Blower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: . EB-500-E • 03/2019 • 60099
(toll free)
AFTER SALES SUPPORT
(toll free)
51.7cc 2 Stroke Petrol Backpack Blower
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL: . EB-500-E • 03/2019 • 60099
16 17
4. Secure the fitting clamp into position by
tightening the wing nut on the fitting clamp in
a clockwise direction (Fig H).
NOTE: the adjustable throttle control handle
with fitting clamp (7) can be re-adjusted after
full assembly of the other tubes.
Assembling the Middle & Lower
Blow Tubes (15/16)
1. With the adjustable throttle control handle
with fitting clamp (7) now secured to the
upper blow tube (14), insert the end of the
upper blow tube (14) with raised ridges on
it inside the flexible pipe (13), approximately
4cm until it can not be pushed in any further
(Fig I).
2. Secure the other adjustable clamp on the
flexible pipe (13) using the screwdriver end of
the supplied spark plug spanner / combination
screwdriver (28) by turning the screw on the
clamp in a clockwise direction until tight (Fig J).
3. To add the middle blow tube (15), firstly loosen
the assembly screw by turning it in an anti-
clockwise direction using the screwdriver
end of the supplied spark plug spanner /
combination screwdriver (28) until the screw
end is sitting flush on the internal side of the
middle blow tube.
4. Align the 2 raised locking pins on each side of
the end of the upper blow tube (14) with the
2 x channels on the middle blow tube (15).
Before pushing the 2 tubes together, ensure
the assembly screw is on the underside of the
middle blow tube otherwise the assembly
screw will not engage with the hole in the
upper blow tube (Fig K). Push the tubes
together, and then rotate in a clockwise
direction to connect the tubes together.
You will feel the tubes engage if done correctly.
5. Tighten the assembly screw using the
screwdriver end of the supplied spark plug
spanner / combination screwdriver (28) in a
clockwise direction until tight (Fig L).
6. To add the lower blow tube (16), firstly loosen
the assembly screw by turning it in an anti-
clockwise direction using the screwdriver
end of the supplied spark plug spanner /
combination screwdriver (28) until the screw
end is sitting flush on the internal side of the
lower blow tube (16) (Fig M).
7. Align the 2 raised locking pins on each side
of the end of the middle blow tube (15) with
the 2 x channels on the lower blow tube (16).
Before pushing the 2 tubes together, ensure
the assembly screw is on the underside of the
lower blow tube (16) otherwise the assembly
screw will not engage with the hole in the
middle blow tube (Fig N). Push the tubes
together, and then rotate in a clockwise
direction to connect the tubes together.
You will feel the tubes engage if done
correctly.
8. Tighten the assembly screw using the
screwdriver end of the supplied spark plug
spanner / combination screwdriver (28) in a
clockwise direction until tight (Fig O).
H. L.
I. M.
J. N.
K. O.
TIGHTEN
TIGHTEN
TIGHTEN
LOOSEN
TIGHTEN
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline EB-500-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline EB-500-E in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info