724623
9
Zoom out
Zoom in
Previous page
1/19
Next page
51.7cc 2 Stroke Petrol Backpack Blower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: . EB-500-E • 03/2019 • 60099
(toll free)
AFTER SALES SUPPORT
(toll free)
51.7cc 2 Stroke Petrol Backpack Blower
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL: . EB-500-E • 03/2019 • 60099
14 15
Preparation of the Blower prior to use
This petrol Backpack blower requires some assembly prior to use.
This includes joining of the blower tubes (13,14,15,16), and securing the
adjustable throttle control handle with fitting clamp (7) to the upper blow
tube (14).
Setting up for use
WARNING. Blower tube installation affects both blower balance
and performance.
Stop the engine before installing or removing the blower tubes. Never
perform any maintenance or assembly procedures on this machine while
the engine is running.
Assembling the Upper Blow Tube (14)
1. Place the blower in an upright position on the ground or on a sturdy
work surface (Fig A).
2. Loosen the 2 x adjustable clamps on the flexible pipe (13) using the
screwdriver end of the supplied spark plug spanner / combination
screwdriver (28) by turning the screw on the clamp in an anti-clockwise
direction until they are loose on each end of the flexible pipe (13) (Fig B).
3. Push the larger opening end of the flexible pipe (13) over the end of the
elbow tube (12) approximately 3cm until it hits the last raised ridge on
the end of the elbow tube (12) (Fig C).
4. Secure the adjustable clamp on the flexible
pipe (13) using the screwdriver end of the
supplied spark plug spanner / combination
screwdriver (28) by turning the screw on the
clamp in a clockwise direction until tight
(Fig D).
5. Before proceeding to add the other tubes
for assembly, the adjustable throttle control
handle with fitting clamp (7) needs to be
assembled onto the upper blow tube (14).
Assembling the Adjustable Throttle
Control Handle to the Upper Blow
Tube (14)
1. Loosen the wing nut on the adjustable throttle
control handle with fitting clamp (7) by
turning in an anti-clockwise direction (Fig E).
2. Align the locking pins on the end of the upper
blow tube (14) with the 2 channels on the
adjustable throttle control handle with fitting
clamp (7) then insert the upper blow tube
(14) through the back side of the fitting clamp
(where the cable is located) through to the
front of the fitting clamp (Fig F).
3. With the adjustable throttle control handle
with fitting clamp (7) now fitted loosely to the
upper blow tube (14), you can now position
it to best fit the user. The fitting clamp can be
rotated to the left and right to suit the users
requirement, or can be locked into position by
pushing it further up on the tube to engage
the notch on the top of the fitting clamp with
the raised channel on the upper blow tube
(14) (Fig G).
D.
C.A. B.
E.
TIGHTEN
LOOSEN
LOOSEN
F.
G.
Assembly
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline EB-500-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline EB-500-E in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info