Manual Gardenline DM53E3-D196 (page 13 of 24) (English)

724643

Zoom out

Zoom in

1/24

196cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

(toll free)

AFTER SALES SUPPORT

(toll free)

196cc 4 Stroke Petrol Lawn Mower

e-mail: help@powertoolsupport.com1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

22 23

Assembly of the Hard Catcher

The hard catcher (43) is supplied in 2 sections.

Locate the top half of the catcher on top of the

bottom half and interlock them together by

aligning the clips on the top half of the catcher

into the raised ridge around the bottom half of the

catcher, then push the halves together until they

click into place. (Fig L)

Attaching the Hard Catcher

1. Lift the rear discharge guard (16) in order to

position the assembled hard catcher (43).

NOTE: Do NOT ever start the lawn mower if the

rear discharge guard does not fully return to the

close position if the catcher is not tted.

2. Apply the hard catcher (43) by aligning the

catcher attachment bar (44) on the catcher over

the catcher attachment bracket (15) centrally so

the catcher is sitting evenly.

3. Release the rear discharge guard (16) to secure

the hard catcher (43) into place. (Fig M)

NOTE: Always empty the catcher before it has

reached maximum capacity, otherwise it will

decrease the performance of the lawn mower.

TIP: Do not leave grass clippings in the catcher

for extended periods of time.

Assembly Assembly

Assembly of the Side Discharge Chute

WARNING: Ensure the engine is NOT operating when tting the side

discharge chute (20).

Do not operate or have the engine running when the side ejector cover is

opened and the discharge chute is not tted.

NOTE: The side discharge chute (20) is used to distribute grass clippings

from the side of the mower while the mower is in use. To use this function,

the hard catcher (43) is NOT required to be assembled on the lawn mower.

1. This side ejector has a lock to ensure it is secured

when not in use. Push the lock tab in an upwards

direction to disengage the lock, then using your

other hand, lift up the side ejector cover (21) to

be able to position the side discharge chute (20)

onto the side of the deck of the lawn mower. (Fig

2. Place the side discharge chute (20) into position

on the side of the deck, by aligning the 2 top

tabs on the side discharge chute (20) with the

bars on each side at the top of the side ejector cover (21), and then place

the 2 top tabs underneath the bars to secure (Fig O). Release the side

ejector cover (21). (Fig P)

3. To remove the side discharge chute (20), raise the side ejector cover (21),

and remove the side discharge chute (20). Lower / release the side ejector

cover (21).

NOTE: Ensure the locking tab on the side ejector cover has engaged on

the deck to ensure there is no chance of it opening during operation.

This should not occur anyway as the cover is spring loaded, however, it is

recommended to ensure the lock tab is engaged also.

NOTE: For the

best performance

in “side discharge

chute” mode,

insert the

mulching block

(39).

Recoil Starter Handle holder

When not using the recoil starter (23), it can be pulled up to the recoil starter

handle holder (3). By looping the pull cord through the holder, the recoil

handle can sit securely in the recoil starter handle holder (3) for when not in

use.

Raise ejector cover

P.O.

Slide tabs under bars

How do you remove the front axel cover from a DM53E3-D196 mower? Submitted on 17-5-2022 at 07:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline DM53E3-D196 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardenline DM53E3-D196 Manual

Product: