Manual Gardenline DM53E3-D196 (page 12 of 24) (English)

724643

Zoom out

Zoom in

1/24

196cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

(toll free)

AFTER SALES SUPPORT

(toll free)

196cc 4 Stroke Petrol Lawn Mower

e-mail: help@powertoolsupport.com1800 909 909

MODEL No.: DM53E3-D196 • 08/2018 • 56979

20 21

Assembly Assembly

1. Once the handles are set up as shown in Fig A,

remove the 2 x lower handle locking knobs

( + bolts, curved washers & circle washers) (11)

from your accessory bag (Fig B). Place the lower

handle in position to assemble by aligning the

2 x lower handle ends on the outer side of the

lower handle mounting plates (12).

2. Once in position, insert the bolt on each side

through the lower mounting plate (12) from the

inside of the mounting plate (12) through to the

outside of the lower handle (9) (Fig C).

NOTE: You may need to support the lower

handle to engage the bolt through as shown

in Fig C on the left.

3. Once the bolts are loosely in position, t the

plastic curved washer over the end of the bolt,

then the circle washer (Fig D), then screw the

lower handle locking knob over the plastic circle

washer and secure by turning clockwise until

tight and secure (Fig E).

4. Next select the desired position to set the height

of the full handle assembly. There are 3 positions

as shown in Fig F.

It is suggested to select the middle location

to start with. You can then raise or lower the

adjustment after you have seen the overall

height when the assembly is complete.

5. Rotate both of the forward rotating quick adjustment knobs (14) 90°

(Fig G). THESE ARE FIRM TO ROTATE, however, when you rotate these

knobs the location pin is drawn back into the handle. Align the pin with

the selected position (Fig F) and then rotate the forward rotating quick

adjustment knobs (14) 90°. The pin will locate in the selected hole. Repeat

for the opposite side.

Attaching the Upper Handle Bar

to the Lower Handle

With the lower handle (9) in position, the upper

handle bar (1) can now be secured in position.

IMPORTANT: Again ensure the cables are not

tangled or crossing over before applying the

upper handle bar (1).

1. Remove the 2 x upper handle locking levers

( + curved washer/s , circle washers & locking

knobs) (10) from your accessory bag (Fig H).

2. Align the ends of the upper handle bar (1) on

the external side of the lower handle (9) such

that the holes in the ends of the upper handle

bar (1) align with the holes in the top of the

lower handle (9).

3. Insert the upper handle locking lever (10) bolt

through the upper handle (1), then through the

lower handle (9). When in position repeat on

the opposite side to keep the upper handle bar

(1) sturdy in position (Fig I).

4. Apply the curved washer, circle washer and

locking knob on the internal side of the lower

handles (9), push the locking lever down

towards the handle bar, then tighten the

locking knob until secure (Fig J).

NOTE: Tension on the upper handle locking

lever/s (10) can be adjusted by rotating the

lever knob.

5. Apply the cable clip holder (13) (from your

accessory bag) on the lower handle to ensure

the self propel engagement cable (5) is secure

in position above the handle bar and not

tangled (Fig K).

(X2)

G.F.

90°

How do you remove the front axel cover from a DM53E3-D196 mower? Submitted on 17-5-2022 at 07:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline DM53E3-D196 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardenline DM53E3-D196 Manual

Product: