724642
11
Zoom out
Zoom in
Previous page
1/20
Next page
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
18 19
Cutting Height Adjustment
WARNING: Stop the engine and unplug
the spark plug before any repairs or
maintenance operations.
This mower has one lever to easily adjust the
cutting height. There are 7 height settings.
1. Stop the engine of the lawn mower before
making a height adjustment. To decrease the
cutting height pull the height adjustment lever
(28) out and move it up a notch, towards the handlebar. (Fig L)
2. To increase the cutting height pull the height adjustment lever (28)
out and move it down a notch, towards the engine. (Fig L)
3. After adjustment, ensure the lever is fully
located in the selected notch.
NOTE: If you are unsure of which cutting height to use, begin with a high
setting and trial a small section of lawn, then check the appearance of the
lawn. Then readjust if necessary.
Assembly of the Hard Catcher
WARNING. Ensure the motor is o and
not operating when undertaking this task.
1. The hard catcher (7) is supplied in two sections.
Locate the top half on top of the bottom half and
interlock them together by aligning the clips on
the top half of the catcher into the raised ridge
around the bottom half of the catcher, then push
the halves together until they click into place. (Fig H)
Attaching the Hard Catcher
WARNING. Ensure the motor is o and not operating when
undertaking this task.
1. Lift the rear discharge guard (10) in order to position the catcher. (Fig I)
NOTE: DO NOT ever start the mower if the rear discharge guard (10) does
not fully return to the close position if the catcher is not tted.
2. Apply the hard catcher (7) by aligning the catcher attachment bar (12) on
the catcher over the catcher attachment bracket (11) centrally so the catcher
is sitting evenly. (Fig J)
3. Release the rear discharge guard (10) to secure
the catcher in place. (Fig K)
NOTE: Always empty the hard catcher (7) before
it has reached maximum capacity, otherwise it
will decrease the performance of the mower.
TIP: Do not leave clippings in the catcher for
extended periods.
L.
LOWER
RAISE
I.
Assembly Assembly
K.
J.
H.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline DM46P-DO160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline DM46P-DO160 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info