724642

Gardenline DM46P-DO160 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
16 17
Assembly
WARNING: Stop the engine and unplug the spark plug before any
repairs or maintenance operations.
WARNING: DO NOT attempt to start this mower without rst adding
0.35L of SAE 10W/30 engine oil to the Engine.
WARNING: Do Not attempt to start this mower without the mower
rst being FULLY assembled.
It is necessary to t the
2 x lower handles (6),
upper handle bar (1),
and hard catcher (7) to
the mower. (Fig A)
Attaching the Lower Handles
NOTE: The on/o switch cable (3) is connected to the upper handle bar (1).
Be careful not to tangle the cable when removing the lawn mower from the
box, and during the upper and lower handle assembly.
1. To attach the 2 x lower handles (6), rst remove the 2 x lower handle
locking knobs (+ bolt/s & curved washer/s) (8) from your accessory bag.
Place the lower handle/s in position by rst aligning one of the lower
handle ends on the inner side of the lower handle mounting plate (9).
2. Once in position, insert the bolt on each side through the lower
mounting plate (9) (Fig B) and then through the lower handle (6). (Fig C)
Repeat with the opposite side handle.
3. Once the bolts are loosely in position, t the plastic curved washer, then
screw the lower handle locking knob (8) over the plastic curved washer
and secure by turning clockwise until tight and secure. (Fig D)
Attaching the Upper Handle Bar to the Lower Handles
1. Before positioning the upper handle bar (1), check the orientation of
the upper handle bar allows the on/o switch cable (3) to run down the
upper and lower handles to the engine. Ensure the cable is not tangled in
any way. (Once assembly of the upper handle bar is complete, the cable
clip can be used to secure the on/o switch cable into position). (Fig E)
2. Once the upper handle bar is correctly orientated for assembly to
the lower handles (6), apply the upper handle locking levers (5) (from
accessory bag) into position on the outer sides
of the upper handle bar (1) loosely (Fig F). When
both upper handle locking levers (5) are both in
position, secure and tighten.
3. Apply the cable clip (4) (from your accessory
bag) to ensure the cable is secure in position
and not tangled. (Fig G)
G.
E.
C.B. D.
TIGHTEN
LOOSEN
Assembly Assembly
A.
2 X SETS OF UPPER
HANDLE LOCKING LEVERS
2 X SETS OF LOWER
HANDLE LOCKING KNOBS
F.
TIGHTEN
LOOSEN
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline DM46P-DO160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline DM46P-DO160 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info