782039
31
Zoom out
Zoom in
Previous page
1/53
Next page
Re-tension the chain, if this is necessary.
1. THIS CHAINSAW IS SUPPLIED READY ASSEMBLED.
Remove the chain guard (16) before use.
2. IF IT IS NECESSARY TO RE-TENSION THE CHAIN
Adjusting the chain tension
The correct tension of the saw chain is extremely important and must be checked
before starting and periodically during all sawing work. If you take time to adjust the
saw chain correctly, you will be able to make better cuts and the life of the chain will be
prolonged.
Undo the bar fastening wheel (Fig. 9/pos. 18) by 1/2 of a turn COUNTERCLOCK-
WISE.
Hold the tip of the chain bar upwards and turn the chain tensioning wheel (Fig. 9/pos.
3) IN A CLOCKWISE DIRECTION in order to increase the chain tension. If you turn
the chain tensioning wheel IN A COUNTER-CLOCKWISE DIRECTION, the chain
tension will be reduced. Check that the chain is seated around the entire chain bar
(Fig. 4/pos. X3).
After making the adjustment and with the tip of the bar still upwards, tighten the bar
fastening wheel (Fig. 9/pos. 18). The chain is correctly tensioned when it is closely
seated and can be pulled right around by hand, when the chain brake (5) is released.
m WARNING
Wear high-strength gloves at all times when handling or adjusting the saw chain.
m If the chain is hard to turn around the chain bar or jammed, it is too tightly tensioned.
Make the following small adjustments:
A Undo the bar fastening wheel (Fig. 9/pos. 18) by 1/2 of a turn COUNTERCLOCK-
WISE. Then slacken the chain tension by slowly turning the chain tensioning wheel
(Fig. 9/pos. 3) IN A COUNTER-CLOCKWISE DIRECTION and then pull the chain
back and forth on the bar (Fig. 30). Continue until the chain can be moved smoothly
but is still closely seated (Fig. 4/pos. X2). Increase the tension by turning the chain
tensioning wheel IN A CLOCKWISE DIRECTION.
B When the saw chain is correctly tensioned, hold the tip of the bar upwards and
completely tighten the bar fastening wheel (Fig. 9/pos. 18).
AFTER SALES SUPPORT 35
00800 4003 4003 aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Set up
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardenline CSP41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardenline CSP41 in the language / languages: English as an attachment in your email.

The manual is 6.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info