687471
37
Zoom out
Zoom in
Previous page
1/56
Next page
4 Operation
4.1 Main switch
WARNING: Read the safety instructions
carefully before you start your robotic
lawnmower.
WARNING: Keep your hands and feet away
from the rotating blades. Never put your hands
or feet close to or under the body when the
motor is running.
WARNING: Never use the robotic lawnmower
when persons, especially children, or pets, are
in the cutting area.
Set the main switch in the
1
position to start the
robotic lawnmower.
Set the main switch in the
0
position when the
robotic lawnmower is not in use or if any work,
inspection or maintenance is being carried out.
When the main switch is set in the
0
position the
motors on the robotic lawnmower cannot start.
4.2 Start
1. Press the STOP button to open the hatch.
2. Set the main switch to position
1
.
3. Enter the PIN code.
4. Press the START button.
5. Select the desired operating mode. See
Operating
mode - Start on page 37
.
6. Close the hatch within 10 seconds.
If the robotic lawnmower is parked in the charging
station, it will only leave the charging station when
the battery is fully charged and if the timer is set to
allow the mower to operate.
Note: Always press the START button before closing the
hatch to start the robotic lawnmower.
4.3 Operating mode - Start
When the START button has been pressed the following
operation selections can be selected.
Main area
Secondary area
Override timer
4.3.1 Main area
Main area
is the standard operating mode where the
robotic lawnmower mows and charges automatically.
4.3.2 Secondary area
When mowing secondary areas
Secondary area
setting
must be used. Selecting
Secondary area
will cause the
robotic lawnmower to mow until the battery is empty.
If the robotic lawnmower charges in the
Secondary area
mode, it will fully charge, drive out about 50 cm and then
stop. This indicates that it is charged and ready to start
mowing.
If the main working area has to be cut after charging, it
is appropriate to switch the operation selection to
Main
area
before placing the robotic lawnmower in the
charging station.
4.3.3 Override timer
Any timer settings can be temporarily overridden by
selecting
Override timer
. It is possible to override the
timer for 24 h or 3 days.
4.4 Operating mode Park
When the PARK button is pressed the following
operation selections can be chosen.
4.4.1 Park until further notice
The robotic lawnmower stays in the charging station
until another operating mode is selected by pressing the
START button.
307 - 002 - 11.10.2017 Operation - 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena Smart SILENO R100LiC - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena Smart SILENO R100LiC - 2018 in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena Smart SILENO R100LiC - 2018

Gardena Smart SILENO R100LiC - 2018 User Manual - German - 64 pages

Gardena Smart SILENO R100LiC - 2018 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info