Manual Gardena smart SILENO plus R160LiC 2018 (page 26 of 56) (English)

687475

Zoom out

Zoom in

1/56

Low

and

Medium

security prohibits access to the robotic

lawnmower if the PIN code is unknown.

High

security

also includes a warning that beeps if the correct PIN

code is not entered after a designated time period.

If the wrong PIN code is entered 5 times in succession

the robotic lawnmower is blocked for a time. The

blockage time is extended for every new incorrect

attempt.

Function Low Medium High

Time lock X X X

PIN request X X

Alarm X

3.15.1.1 Time lock

This function means that the robotic lawnmower cannot

be started after 30 days without first entering the correct

PIN code. When the 30 days has passed the robotic

lawnmower will continue to mow as normal, but the

Enter PIN code

message appears when the hatch is

opened. Enter your code again and press OK.

3.15.1.2 PIN request

This function means that the robotic lawnmower

requests a PIN code when the main switch is set to

and each time the hatch is opened. The correct PIN

code must be entered to use the robotic lawnmower.

If the wrong PIN code is entered 5 times in succession

the robotic lawnmower is blocked for a time. The

blockage time is extended for every new incorrect

attempt.

3.15.1.3 Alarm

This function means that an alarm sounds if the PIN

code is not entered within 10 seconds after the STOP

button has been pressed or the robotic lawnmower has

been lifted up for any reason. A ticking noise indicates

that the PIN code must be entered to prevent triggering

the alarm. The alarm can be turned off at any time by

entering the correct PIN code.

3.15.2 Advanced

Advanced

New loop signal

Change PIN code

3.15.2.1 New loop signal

The loop signal is randomly selected to create a unique

link between the robotic lawnmower and the charging

station. In rare cases, there may be a need to generate

a new signal, for instance if two adjacent installations

have a very similar signal.

1. Place the robotic lawnmower in the charging station.

2. Select

New loop signal

in the menu.

3. Press OK and await confirmation that the loop signal

has been generated. This normally takes about 10

seconds.

3.15.2.2 Change PIN code

Enter the new PIN code and press OK. Confirm by

entering the same code again and pressing OK. When

the PIN code is changed, the message

PIN code

changed

appears in the display.

Make a note of the new PIN code on the designated line

in Memo. See

Introduction on page 3

3.16 Installation

For many working areas there is no need to change the

factory settings but sometimes, depending on the lawn

complexity, the mowing result can be improved by

making manual settings.

INSTALLATION

Advanced

Lawn coverage

3.16.1 Lawn coverage

This menu function is used to steer the robotic

lawnmower to remote parts of a working area. In

complex gardens with for instance many areas which

are joined by narrow passages, the mowing result can

be much improved by changing settings.

Up to 3 remote areas can be set. Select an area using

the left and right arrow keys followed by OK.

Lawn coverage

Area 1

Area 2

Area 3

Area3

Area2

Area1

A number of unique selections are required to allow the

robotic lawnmower to reach the remote area.

26 - Installation 307 - 002 - 11.10.2017

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena smart SILENO plus R160LiC 2018 in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena smart SILENO plus R160LiC 2018

Gardena smart SILENO plus R160LiC 2018 User Manual - German - 64 pages

Gardena smart SILENO plus R160LiC 2018 User Manual - Dutch - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena smart SILENO plus R160LiC 2018 Manual

Product: