687465

Gardena SILENO plus R160 Li-LiC Manual

26
Zoom out
Zoom in
Previous page
1/56
Next page
Low
and
Medium
security prohibits access to the robotic
lawnmower if the PIN code is unknown.
High
security
also includes a warning that beeps if the correct PIN
code is not entered after a designated time period.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
Function Low Medium High
Time lock X X X
PIN request X X
Alarm X
3.15.1.1 Time lock
This function means that the robotic lawnmower cannot
be started after 30 days without first entering the correct
PIN code. When the 30 days has passed the robotic
lawnmower will continue to mow as normal, but the
Enter PIN code
message appears when the hatch is
opened. Enter your code again and press OK.
3.15.1.2 PIN request
This function means that the robotic lawnmower
requests a PIN code when the main switch is set to
1
and each time the hatch is opened. The correct PIN
code must be entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
3.15.1.3 Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the robotic lawnmower has
been lifted up for any reason. A ticking noise indicates
that the PIN code must be entered to prevent triggering
the alarm. The alarm can be turned off at any time by
entering the correct PIN code.
3.15.2 Advanced
Advanced
New loop signal
Change PIN code
3.15.2.1 New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower and the charging
station. In rare cases, there may be a need to generate
a new signal, for instance if two adjacent installations
have a very similar signal.
1. Place the robotic lawnmower in the charging station.
2. Select
New loop signal
in the menu.
3. Press OK and await confirmation that the loop signal
has been generated. This normally takes about 10
seconds.
3.15.2.2 Change PIN code
Enter the new PIN code and press OK. Confirm by
entering the same code again and pressing OK. When
the PIN code is changed, the message
PIN code
changed
appears in the display.
Make a note of the new PIN code on the designated line
in Memo. See
Introduction on page 3
.
3.16 Installation
For many working areas there is no need to change the
factory settings but sometimes, depending on the lawn
complexity, the mowing result can be improved by
making manual settings.
INSTALLATION
Advanced
Lawn coverage
3.16.1 Lawn coverage
This menu function is used to steer the robotic
lawnmower to remote parts of a working area. In
complex gardens with for instance many areas which
are joined by narrow passages, the mowing result can
be much improved by changing settings.
Up to 3 remote areas can be set. Select an area using
the left and right arrow keys followed by OK.
Lawn coverage
Area 1
Area 2
Area 3
Area3
Area2
Area1
A number of unique selections are required to allow the
robotic lawnmower to reach the remote area.
26 - Installation 307 - 002 - 11.10.2017
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena SILENO plus R160 Li-LiC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena SILENO plus R160 Li-LiC in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena SILENO plus R160 Li-LiC

Gardena SILENO plus R160 Li-LiC User Manual - German - 56 pages

Gardena SILENO plus R160 Li-LiC User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info