687465

Gardena SILENO plus R160 Li-LiC Manual

24
Zoom out
Zoom in
Previous page
1/56
Next page
To disable mowing a whole day, uncheck both periods.
3.12.5 Copy
Use this function to copy the current day settings to
other days.
Mark
Copy
by using arrow keys and press OK. Then use
the up and down arrow keys to move the cursor
between days. The times will be copied to the days that
are marked with OK.
3.12.6 Reset
This function resets the timer to the factory setting,
where the robotic lawnmower is allowed to operate 24
hours a day every day.
Reset timer
Current day
All week
3.12.6.1 Current day
This resets the day that is selected in the tab system.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day.
3.12.6.2 All week
This resets all days in the week.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day every day.
3.13 SensorControl
Only for R130Li, R130LiC, R160Li and R160LiC
SENSORCONTROL
On/Off
Cutting time
This function allows the robotic lawnmower to
automatically adjust its mowing times based on how
quickly the lawn grows. When the weather is good for
grass growth, the robotic lawnmower mowes more often
and when the grass growth is slower the robotic
lawnmower will automatically spend less time on the
lawn. The first mowing cycle of the day will however
always be completed. After that, SensorControl will
decide whether to continue or not.
For optimal SensorControl performance, it is
recommended to only deselect the times when the
robotic lawnmower must not operate. All other time
should be made available for the SensorControl. Manual
timer settings always have priority over SensorControl
so the robotic lawnmower will not be allowed to mow
more than the timer settings.
When the SensorControl is activated, the robotic
lawnmower needs time to decide what the optimal
mowing time is for the working area in question. For this
reason it can take a couple of days of calibration before
the mowing results are optimal.
Please, note that SensorControl is reset if the mower
has been shut down for more than 50 hours or if a
Reset
of all user setting
is done. SensorControl is not affected
if a reset of timer setting is done.
When the SensorControl is activated, it is very important
to regularly check that the blade disc is clean and that
the blades are in good condition. Any grass twisted
around the blade disc shaft or blunt blades can affect
how the SensorControl functions.
3.13.1 SensorControl On/Off
To activate SensorControl: check the box by pressing
OK.
3.13.2 Cutting time
There are 3 cutting levels to choose from.
Cutting time
Low
Medium
High
If the mowing results are not optimal when using the
SensorControl, Cutting time settings may need
adjusting.
3.13.2.1 To adjust the cutting time
1. Place the cursor by
Cutting time
and press OK.
2. Use the right and left arrow keys to increase or
decrease the cutting time in 3 preset intervals.
3.14 Smart System
Only for R100LiC, R130LiC and R160LiC
24 - Installation 307 - 002 - 11.10.2017
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena SILENO plus R160 Li-LiC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena SILENO plus R160 Li-LiC in the language / languages: English as an attachment in your email.

The manual is 7,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena SILENO plus R160 Li-LiC

Gardena SILENO plus R160 Li-LiC User Manual - German - 56 pages

Gardena SILENO plus R160 Li-LiC User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info