Manual Gardena MultiControl duo -1874 C 2030 duo plus (page 9 of 16) (English)

584212

Zoom out

Zoom in

1/16

1. Press the Menu key twice.

Start and the hours flash on the display.

2. Press the Menu button to jump to the next

programme level

– or –

change programme data with the ▼-▲ buttons

and confirm with the OK button.

When the watering duration is changed while

a program is running, the current watering

cycle is ended.

C) Manual watering:

Each valve can be opened or closed manually

at any time. A program-controlled open valve

can also be closed early without changing the

program data (watering start time, watering dura-

tion and watering frequency). The controller

must be fitted.

1. Select Valve 1 (

V1) or Valve 2 (V2

) with

the ▼-▲ buttons.

2. [ Fig. P16 ]: Press Man.-key to open the valve

manually (or to close an open valve).

Run Time and the watering time in minutes (set

to 30 minutes in the works) flash for 10 seconds

on the display.

3. [ Fig. P17 ]: Whilst the watering time in minutes

is flashing, the watering duration can be modified

with the ▼-▲ button (between 0:00 and 0:59)

(example: 10 minutes) and confirm with the

OK-key.

4. Press Man.-key to close the valve early.

The valve is closed.

The amended manual opening period is stored,

i. e. each time the valve is opened manually in

future the modified opening period is preset. If the

manual opening period is amended to 0:00, the

valve is closed and also remains closed after the

Man.-key is pressed (child lock).

If the valve has been manually opened and a pro-

grammed start of watering overlaps with the manual

opening duration then the watering programme will

not be carried out.

Example:

The valve is opened at 9.00 a.m. manually, the

opening period is 10 minutes. A program with

a start time between 9.00 and 9.10 a.m. will

not be undertaken in this case.

Reset [ Fig. P18 ]:

The factory settings are restored.

v Press Man.-key and Menu-key simultaneously

for 3 seconds.

All the LCD symbols are displayed for 2 seconds

and the display moves to the normal display.

• All the program data are set to zero.

• The manual watering period is set to 0:30 again.

• The time and day of the week are retained.

Important information:

If no entry is made during programming for a period

of more than 60 seconds, the normal display reap-

pears. In this case all changes made up till now will

be applied.

If a sensor is inserted in the Water Control regis-

ters wet (wet), the corresponding programme will

not be carried out.

5. MAINTENANCE

Clean filter [ Fig. M1 ]:

The filter f should be checked regularly and

cleaned when necessary.

1. Unscrew sleeve nut o of the Water Control by

hand from the tap thread (do not use pliers).

2. If necessary unscrew the adaptor i.

3. Remove filter f from sleeve nut o and clean.

4. Fit the Water Control again (see 3. INITIAL

OPERATION To connect the Water Control).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena MultiControl duo -1874 C 2030 duo plus in the language / languages: English as an attachment in your email.

The manual is 0.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena MultiControl duo -1874 C 2030 duo plus

Gardena MultiControl duo -1874 C 2030 duo plus User Manual - German - 18 pages

Gardena MultiControl duo -1874 C 2030 duo plus User Manual - Dutch - 17 pages

Gardena MultiControl duo -1874 C 2030 duo plus User Manual - French - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena MultiControl duo -1874 C 2030 duo plus Manual

Product: