Manual Gardena MultiControl duo -1874 C 2030 duo plus (page 7 of 16) (English)

584212

Zoom out

Zoom in

1/16

Fit anti-theft device (optional) [ Fig. I8 ]:

To secure your Water Control against theft, you

can obtain the GARDENA Anti-theft device

Art. 1815-00.791.00 from GARDENA Service.

1. Screw clamp s with screw d firmly to the back

of the Water Control.

2. Use clamp s e. g. for fixing a chain.

It is no longer possible to remove the screw after

it has been screwed in.

4. PROGRAMMING

To set the programme, the controller can be

removed and mobile programming can

be carried out (see 3. INITIAL OPERATION

Inserting battery).

Programming can be discontinued at any time by

pressing the Man. button. All programme data

changed up to this time and confirmed with the

OK button is saved.

Set current time and day of week:

1. [ Fig. P1 ]: Press Menu-key [Level 2] (not

necessary if the battery has just been inserted).

The hours display and Time flash.

2. [ Fig. P2 ]: Set the time in hours with the

▼-▲ button (example: 9 hours) and confirm

with the OK-key.

Time and the minutes display flash.

3. [ Fig. P3 ]: Set the time in minutes with the

▼-▲ button (example: 30 minutes) and confirm

with the OK-key.

Time and the day of the week display flash.

4. [ Fig. P4 ]: Set day of week with the ▼-▲ but-

tons (e. g. (Tu) and confirm with the OK button.

The display moves to the message “Entering

watering programme” of the watering mode

“Scheduled watering” [Level 3].

Start Prog and the hours will flash on the

display.

Watering modes:

The Water Control has 3 watering modes:

A) Scheduled watering:

With the “scheduled watering”, watering begins

as per the set programme. There is the addi-

tional option to consider soil moisture or rain in

the watering programme. In the case of rain

or sufficiently moist soil, the programme’s stop

is activated or activation of the programme is

prevented. Manual watering Man. + OK is still

possible.

B) Direct sensor control :

With “direct sensor control”, watering is exclu-

sively controlled in dependency on soil moisture

between 20:00 and 06:00, if the sensor has

indicated dry. 1 or 2 Soil Moisture Sensors can

be connected.

C) Manual watering:

With “Manual watering”, watering begins imme-

diately after Man. + OK has been pressed and

can be operated independently of the sensor

status.

Entering watering programme:

A) Scheduled watering:

1. Select programme for Valve 1 (

V1) or

Valve 2 (V2

) with the ▼-▲ buttons (V1 / V2),

(not possible if the current time of day and week-

day have been previously entered).

2. [ Fig. P5 ]: Press Menu-key twice [Level 3]

(not necessary if the current time and day of the

week has been entered).

Start Prog and the hours section flash on the

display.

3. [ Fig. P6 ]: Set the watering start time hours with

the ▼-▲ button (e. g. 6) and confirm with the

OK-key.

Start Prog and the minute display flashes on

the screen.

4. [ Fig. P7 ]: Set the minutes for starting the

watering time with the ▼-▲ button

(example: 20 minutes) and confirm with the

OK-key.

Run Time and the hours for the watering time

flash on the display.

5. [ Fig. P8 ]: Set the hours for the watering time

with the ▼-▲ button (example: 0 hours) and

confirm with the OK-key.

Run Time and minutes for the watering time

flash on the display.

6. [ Fig. P9 ]: Set watering time minutes with the

▼-▲ button (example: 10 minutes) and confirm

with the OK-key.

Watering cycle flashes on the display.

The watering frequency can be selected by:

• the (7.) watering cycle (right hand column of

the display)

– or –

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena MultiControl duo -1874 C 2030 duo plus in the language / languages: English as an attachment in your email.

The manual is 0.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena MultiControl duo -1874 C 2030 duo plus

Gardena MultiControl duo -1874 C 2030 duo plus User Manual - German - 18 pages

Gardena MultiControl duo -1874 C 2030 duo plus User Manual - Dutch - 17 pages

Gardena MultiControl duo -1874 C 2030 duo plus User Manual - French - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena MultiControl duo -1874 C 2030 duo plus Manual

Product: