14
GB
The factory settings are restored.
vPress Man.-key and Menu-key simultaneously for 3 seconds.
All the LCD symbols are displayed for 2 seconds and the
display moves to the normal display.
•All the program data are set to zero.
•The manual watering period is set to 00::3300again.
•The language, the time and the day of the week are retained.
If no entry is made during programming for a period of more than
60 seconds, the normal display reappears. In this case all changes
made up till now will be applied.
When a sensor installed in the Water Computer registers damp
(OFF), the programmed watering is not carried out. There must
be a 1 minute pause between programs.
6. Putting Your Water Computer out of Operation
1. Press Menu-key 3 times, select Prog OOFFFFwith the rotary
button and confirm with the OK-key.
The watering program is not run.
2. Store your Water Computer in a dry place where it is protected
from frost.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
vImportant: Make sure that the unit is disposed of via your
municipal recycling collection centre.
vPlease return flat batteries to a GARDENA dealer or dispose
of them properly at your nearest recycling centre.
Only dispose of batteries when they are flat.
7. Maintenance
The filter Nshould be checked regularly and cleaned when
necessary.
1. Unscrew sleeve nut Iof the Water Computer by hand
from the tap thread (do not use pliers).
2. If necessary unscrew the adaptor H.
3. Remove filter Nfrom sleeve nut Iand clean.
4. Fit the Water Computer again (see 4. Putting Your Water
Computer into Operation
“Connecting Water Computer”
).
Reset:
Important information:
Storage /
Overwintering:
Disposal:
(in accordance with
RL2002/96/EC)
Disposing of flat batteries:
Clean filter:
H
I
N
