13
GB
5.3 Other settings:
If a value in the programme is to be changed, this can be
changed without changing the other values in the programme.
1. Press the Menu key twice.
Start
and the hours flash on the display.
2. Press the Menu button to jump to the next programme level
– or –
change the programme data with the rotary button and confirm
by pressing the OK button.
If the watering period is changed while a programme is
running, the current watering is ended.
The valve can be opened or closed manually at any time.
A program-controlled open valve can also be closed early with-
out changing the program data (Watering start time, watering
duration and watering frequency).
The controller must be fitted.
1. Press Man.-key to open the valve manually
(or to close an open valve).
Run Time
and the watering time in minutes (set to
3300
minutes
in the works) flash for 10 seconds on the display.
2. Whilst the watering time in minutes is flashing, the watering
duration can be modified with the rotary button (between
00::0000and 00::5599) (example: 1100minutes) and confirm by
pressing the OK button.
3. Press Man.-key to close the valve early.
The valve is closed.
The amended manual opening period is stored, i.e. each time
the valve is opened manually in future the modified opening
period is preset. If the manual opening period is amended to
00::0000, the valve is closed and also remains closed after the
Man.-key is pressed (child lock).
If the valve has been opened manually and a programmed start
of a watering period overlaps the manual opening period, the
programmed starting time is suppressed.
Example:
The valve is opened at 9.00 a.m. manually, the opening period is
30 minutes. A program with a start time (START) between 9.00
and 9.30 a.m. will not be undertaken in this case.
Manual operation:
1.
2.
Read / modify
watering programmes:
