474442
16
Zoom out
Zoom in
Previous page
1/21
Next page
D. ASSEMBLY / DISASSEMBLY
BAR AND CHAIN ASSEMBLY
Take great care when assembling to ensure this is performed correctly.
ENGLISH - 6
E. START-UP AND STOPPING
Start-up: grip both handles firmly, release the chain
brake lever whilst ensuring hand is still on front
handle, press and maintain the switch block (fig E1)
pressed in, then press the switch (fig E2) (at this
point the switch block can be released).
Stopping: The machine will stop whenever the
switch is released or by activating the chain brake.
F. BAR AND CHAIN LUBRICATION
ATTENTION! Insufficient lubrication will provoke
chain breaking and can cause serious injury.
Refer to “Maintenance & Storage” for indications on
ensuring that the chain oil is sufficiently distributed.
Choice of chain oil
Use oil which is approved by the manufacturer.
We advise the use of bio chain oil which is
biologically degradable.
Filling oil tank
Unscrew the oil tank cap, and fill the tank taking
care not to spill any oil (if this occurs clean the
machine carefully) and then screw the cap back on
tightly.
Remove the plug from the power supply before working on the product.
1a & 1b. Check that the chain brake is not activated. If so, deactivate it.
2a & 2b. Unscrew the chain tensioning knob and rotate in an anti-clockwise direction to remove the drive
sprocket cover.
Wear Gloves.
3 Position the chain over the bar, starting at the nose sprocket, fitting it into the guide bar groove.
Ensure that the sharp side of the cutting teeth face in a forward direction on the upper part of the bar.(see
markings on the bar)
4. Rotate the chain tensioning mechanism anti-clockwise as far as possible.
5a & 5b. Mount the bar on the bar retaining screw and it will attach to the magnet. Position the chain over
the drive sprocket.
6a & 6b. Replace the drive sprocket cover, ensuring the drive teeth of the chain are engaged in the drive
sprocket and in the bar guide groove.
7a & b. To tension the chain, turn the chain tensioner knob in a clockwise direction until securely tightened.
The chain is now tensioned correctly for use.
Tensioning the chain too tightly will overload the motor and cause damage. Insufficient tension can provoke
chain derailing, whereas a chain tightened correctly provides the best cutting characteristics and prolonged
work life. Check the tension regularly because the chain length tends to stretch with use (especially when
the chain is new; after the first assembly, the chain tension must be checked after a few minutes machine
operation); in any case do not tighten the chain immediately after use, but wait until it cools down.
In cases where the loosened chain needs to be adjusted, always unscrew the chain tensioning knob 2 turns
and then securely tighten again leaving the chain tensioned for use.
Warning:- The chain and guide bar can become very hot
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena CSI 4020-X-8863 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena CSI 4020-X-8863 in the language / languages: English as an attachment in your email.

The manual is 7.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena CSI 4020-X-8863

Gardena CSI 4020-X-8863 User Manual - German - 21 pages

Gardena CSI 4020-X-8863 User Manual - Dutch - 21 pages

Gardena CSI 4020-X-8863 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info