564555
20
Zoom out
Zoom in
Previous page
1/52
Next page
20
Operation
Keep all body parts away from the cutting blades. Do not attempt to remove
cuttings or take hold of the material being cut when the blades are rotating.
Only remove cuttings that have accumulated in the device after you have
deactivated the device and disconnected the plug from the socket. Wear work
gloves when doing so!
Carry the hedge trimmer by the handle when the blades are not moving.
Attention! This device generates noise up to 98 dB (A). For this reason, you
should wear adequate ear protection!
For your safety wear a mask.
This device runs with an integrated (electrical) motor brake for your conve-
nience and safety. It ensures that the cutting unit immediately stops when the
switches are released.
1. Connect the power plug to an easily accessible socket using an extension cord. The
socket must correspond to the device’s technical data. If the collection accessories
have been connected properly, the operating light will turn on.
2. In order to activate the device, push the safety lock forward (this will release the main
switch 1) and depress the switches 1 and 2. After you have pressed switch 1, you can
release the safety lock. However, as soon as you release one of the switches, the device
will deactivate.
3. Move the device evenly over the hedge and back and forth along its sides until you
have shaped the hedge as desired.
4. From time to time, shake any waste located in the hose down into the collection bag.
Only in this way is it possible to work without the cuttings causing a blockage.
5. After use, remove the collecting bin and/or collection system and empty them. Remove
any cuttings jammed in the device.
6. Stow the device and accessories in a place, which is not accessible for children, which
is kept locked, and is dry.
Technical data
Model: GG20
Input voltage: 230–240 V~, 50 Hz
Nominal output: 500 W
Speed without load (rpm): 2900/min
Sound power level LWA: 87 dB (A) / LPA: 98 dB (A)
Vibration strength rear handle: 1.697 m/s2
Vibration strength front handle: 1.963 m/s2
Uncertainty factor: K=1.5 m/s2
Safety class: II, IP20
Suited for plants with a diameter of 20 mm.
The specified vibration emission value according to EN 60745.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garden Groom PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garden Groom PRO in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info