564555
19
Zoom out
Zoom in
Previous page
1/52
Next page
19
Assembly
During assembly, do not reach into the cutting unit. The blade is very sharp, you could
injure yourself. Before you start work, you have to attach the collecting bin (for smaller
cuttings) or the collection system (for larger areas) consisting of the adapter, hose, and
collecting bag to the device.
Mounting the collection system
1. If the collecting bin is already mounted on the device, fold the locking lever to the out-
side and remove the bin.
2. Set the device down so that the blade is pointing up and hold it in place with one hand
on the handle.
3. If necessary, fold the locking lever to the outside with your other hand.
4. Carefully set the wider end of the adapter on the opening on the side of the cutting
head. Make sure that the adapter end is inserted in the corresponding brackets on the
cutting head.
5. Push the top of the adapter down so that the pin on the bottom of the locking mecha-
nism audibly locks into place.
6. Fold the lever back to its previous position and push it into the indentation on the adapter.
7. Make sure that the adapter is securely seated.
8. Fit the collecting hose on the adapter and apply the Velcro fastener. The fastener should
be pulled as tight as possible around the adapter to prevent the hose from slipping.
9. Connect the collecting hose and bag with the zipper.
Mounting the collecting bin
1. Set the device down so that the blade is pointing up and hold it in place with one hand
on the handle.
2. Fold the locking lever to the outside with your other hand.
3. Set the collecting bin on the device with the vents up and the wider, open side pointing
towards the cutting head.
4. Push the bin under the cutting head until it locks into place and then push it down from
above. A pin is located on the bottom of the bin. It must audibly lock into the device’s
locking mechanism.
5. Fold the lever back to its previous position and push it into the indentation on the adapter.
6. Make sure that the adapter is securely seated.
English
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garden Groom PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garden Groom PRO in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info