718565

Gaggia Carezza Style Manual

20
Zoom out
Zoom in
Previous page
1/72
Next page
20
ENGLISH
4.6 Circuit Priming
When the water tank is empty, the machine circuit must be
primed again.
Note: if the machine has been operating without
water for a lot of time and the " " (14),
" " (20) and " " (18) lights are blinking, please refer
to the "Troubleshooting" table.
•
5
Place a container under the steam wand (Pannarello).
• Open the "hot water/steam" knob (3) by turning it clock-
wise. The pump is activated automatically.
• Wait until a steady jet of water ows out of the steam
wand (Pannarello).
•
6
Close the "hot water/steam" knob (3) by turning it
counter-clockwise. Remove the container.
Note: if the steam knob is opened by mistake
during the warm-up phase, the " " light
(20) starts blinking. Close the knob and wait until the
machine is ready.
4.7 Using the Machine for the First Time or
After a Period of Inactivity
This simple operation ensures an optimum brewing and must
be performed:
- at rst start-up;
- when the machine remains inactive for a long time (more
than 2 weeks).
Dispensed water must be emptied into an
adequate drain. It is not suitable for food use. If
the container lls up during the cycle, stop dispensing
water and empty the container before resuming the
operation.
A
2
Rinse the water tank and rell it with fresh drinking
water. Insert the water tank back into its seat in the coee
machine and make sure that it locks into place - its prole
should adhere to that of the coee machine.
B Turn on the machine by pressing the (11) button. Wait until
the " " light (14) turns on steady.
C
5
Place a container under the steam wand (Pannarello).
Open the knob (3) by turning it clockwise. The pump is ac-
tivated automatically.
D Dispense the whole water tank content from the steam/
hot water wand (Pannarello); to stop the dispensing pro-
cess, close the knob (3) by turning it counter-clockwise.
During this operation the pump is automatically
disengaged and the " " light (20) is blinking:
this is a normal behaviour of the machine. Close the
knob. Wait until the " " light (14) is steady on before
opening the knob again.
E
2
Fill the water tank with fresh drinking water. Insert
the water tank back into its seat in the coee machine and
make sure that it locks into place - its prole should adhere
to that of the coee machine.
F
13
14
Insert the lter holder (21) into the brew unit (4)
from the bottom. Turn the pressurized lter holder from
left to right until it locks into place. Release the pressurized
lter holder grip. The handle will turn slightly to the left.
This movement guarantees optimum lter holder perfor-
mance.
G
15
Place a suitable container under the lter holder.
H
17
Press the " " button and dispense a cup of hot wa-
ter.
At the end of the process, stop the operation by pressing
the " " button.
I Repeat the operations described in step (H) until the wa-
ter tank is completely empty.
L
2
Rell the water tank with fresh drinking water.
M
19
Remove the lter holder from the unit by turning it
from right to left and rinse it with fresh drinking water.
Now the machine is ready. Please see related chapters for
operating details on how to brew coee and dispense steam.
5 Rinsing
Note: make sure the lter holder is inserted to
ensure a proper warm-up of the machine.
The machine is set so as to automatically rinse the coee circuit
with fresh water every time it is turned on. This is conceived to
ensure the correct machine warm-up and an optimum coee
aroma.
Place a container under the dispensing spout.
On newly purchased machines this function is active (the " "
light (16) is on) and is performed at the end of the warm-up
phase, when the " " light (14) turns on steady.
Note: should no water pour from the lter
holder, perform a manual rinse as described in
sect. 7.1.
4219-450-03711 MANUAL GAG. CAREZZAIT-EN-DE-FR-ES-PT.indd 20 03/12/2018 11:32:10
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Carezza Style at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Carezza Style in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 21,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info