718558
12
Zoom out
Zoom in
Previous page
1/84
Next page
6
ENGLISH
5. Activation and deactivation
Make sure to read the “3. Safety” chapter.
5.1 Using the selection buttons
Some function buttons can be used to navigate through functions / menus:
The OK button is used to select / conrm / stop the function.
The ESC button is used to return to the main menu, one level at a time.
The UP button is used to move upwards.
The DOWN button is used to move downwards.
5.2 First start
Before rst use the following operations must be carried out:
Water circuit priming.
One automatic rinse/self-cleaning cycle.
One manual rinse cycle.
5.2.1 Water circuit priming
During this process fresh water ows through the internal circuit and the machine
heats up. The process requires a few minutes.
>
Check that the classic milk frother is installed.
>
Place a container under the milk frother.
>
Press the OK button to start the water circuit priming cycle. The machine starts
dispensing hot water through the milk frother. The progress bar on the display shows
the status of the operation. The machine automatically stops dispensing water at the
end of the process. The display shows that the machine is heating. At the end of the
heating phase, the machine launches an automatic clean water rinse/self-cleaning cycle
of the internal circuits.
5.2.2 Automatic rinse/self-cleaning cycle
> Place a container under the coffee dispensing spout.
Burning hazard! Be careful of hot water or steam sprays.
The operation lasts less than a minute. Wait for the cycle to end automatically.
If necessary, the cycle can be interrupted by pressing the OK button.
> Empty the container. The machine goes back to the main menu.
Now it is possible to launch the manual rinse cycle.
5.2.3 Manual rinse cycle
The complete manual rinse cycle comprises two consecutive phases:
One “Coffee brewing circuit rinsing phase”, to be repeated twice.
One “Hot water dispensing circuit rinsing phase”.
Coffee brewing circuit rinsing phase
During this phase, the coffee brewing cycle is started.
> Place a container under the coffee dispensing spout.
> Press the ESPRESSO LUNGO button. The machine starts brewing coffee.
Repeat the previous operations, then proceed.
> After the product has been brewed, empty the container.
If necessary, the cycle can be interrupted by pressing the OK button.
Hot water circuit rinsing phase
> Follow the instructions in the “4.2 Water tank lling” chapter and ll the water tank up
to the CALC CLEAN level.
MAX
CA
LC
CLEAN
AX
CALC
CLEAN
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Anima at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Anima in the language / languages: English, German, Italian as an attachment in your email.

The manual is 32,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggia Anima

Gaggia Anima User Manual - French, Portuguese, Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info