760867
25
Zoom out
Zoom in
Previous page
1/56
Next page
24
en Keep warm function
z
Keep warm function
Keep warm function
This function is suitable for melting chocolate or butter
and for keeping food warm.
Activating
Select the relevant cooking position and then set the
power level to ò.î£ in the settings area.
Deactivating
Touch the cooking position display and select any
power level in the settings area.
This function has now been deactivated.
s
Transfer function
Transfer function
This function lets you transfer the selected power level
or temperature setting and the cooking time from one
cooking position to another.
If you remove an item of cookware from the cooking
surface or move it, the cooking position it was
previously on stops heating. The settings for the
cooking position will be retained for 30 seconds.
When you place the cookware back in this position, the
same settings will be used.
Activation
1Place an item of cookware on the cooking surface.
The ˆ symbol will appear on the new cooking
position.
2Touch the ˆ symbol on the new cooking position
to confirm transfer of the settings. The power level
will light up.
The settings have been transferred to the new cooking
position.
25
Wireless temperature sensor en
Wireless temperature sensor
Wi reless temperature sensor
You will need to connect the wireless temperature
sensor to the hob before using cooking sensor mode for
the first time.
Preparing and maintaining the
wireless temperature sensor
This section provides information on:
Attaching the silicone patch
Attaching the wireless cooking sensor
Cleaning
Replacing the battery
The silicone patch and temperature sensor can be
purchased from specialist retailers or through our
technical after-sales service or our official website. To
do this, quote the relevant reference number:
Adhering the silicone patch
The silicone patch secures the cooking sensor to the
cookware.
When using a saucepan with cooking sensor mode for
the first time, the silicone patch must be attached
directly to this saucepan. Proceed as follows:
1That the adhesive area on the pan is free from
grease. Clean the pan, dry it thoroughly and wipe
the adhesive area with a spirit.
2Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the pan
in the correct place using the enclosed template as
a guide.
3Press down all over the surface of the silicone
patch, including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
Ensure that the silicone patch is completely dry
before attaching the cooking sensor.
Fill the pot so that the contents reach high enough
to cover the cooking sensor's silicone patch.
To prevent overheating, do not attach the cooking
sensor to other hot cookware.
Remove the cooking sensor from the pot after
cooking. Store it in a clean, safe place away from
sources of heat.
You can use up to three cooking sensors at the
same time.
Connecting the wireless temperature
sensor to the control panel
To connect the wireless temperature sensor to the
control panel, follow the instructions below:
1Touch the t on the main screen.
2Select the Cooking sensor pairing option and then
touch the G symbol to confirm your choice.
3Briefly touch the ¨ symbol on the wireless cooking
sensor within the next 30 seconds.
After a few seconds, the result of the connection
between the cooking sensor and the control panel
will appear on the display.
Then touch the G symbol to confirm.
4To connect another cooking sensor, touch the
G symbol. To return to the basic settings, touch
the ' symbol.
The Cooking sensor mode is available once the cooking
sensor has been connected to the control panel
correctly.
00577921 Set of 5 silicone patches
CA060300 Temperature sensor and set of 5 silicone
patches
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CX492101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CX492101 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CX492101

Gaggenau CX492101 Installation Guide - English, German - 24 pages

Gaggenau CX492101 User Manual - German - 56 pages

Gaggenau CX492101 Installation Guide - Dutch - 24 pages

Gaggenau CX492101 User Manual - Dutch - 56 pages

Gaggenau CX492101 Installation Guide - French, Italian, Polish, Portuguese, Swedish, Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info