761868
12
Zoom out
Zoom in
Previous page
1/16
Next page
en Disposal
12
Fault Cause and troubleshooting
Several hotplates have been used over a prolonged period at high power set-
tings. The hotplate has been switched off to protect the electronics.
1. Wait a while.
2. Touch any touch field.
aWhen the message no longer appears, the electronics have cooled down
sufficiently. You can continue to cook.
Despite being switched off by , the electronics have become hot again. All
hotplates have therefore been switched off.
1. Wait a while.
2. Touch any touch field.
aWhen the message no longer appears, the electronics have cooled down
sufficiently. You can continue to cook.
and the heat setting flash al-
ternately. A signal sounds.
Hot pot near the control panel. There is a risk that the electronics will overheat.
Remove the pan.
aThe display goes out shortly afterwards.
and audible signal Hot pot near the control panel. The hotplate has been switched off to protect the
electronics.
1. Remove the pot.
2. Wait a while.
3. Touch any touch field.
aWhen the message no longer appears, the electronics have cooled down
sufficiently. You can continue to cook.
The hotplate was on for too long and has switched off automatically.
You can switch the hotplate back on again immediately.
and hotplates do not heat up Demo mode is activated.
1. Disconnect the appliance from the power supply for 30seconds by briefly
switching off the circuit breaker in the fuse box.
2. Touch any touch field within the next threeminutes.
A message with "E" appears on
the display, e.g. E0111.
The electronics have detected a fault.
1. Switch the appliance off and on again.
aIf the fault was a one-off, the message disappears.
2. If the message appears again, call the after-sales service. Please specify the
exact error message when calling.
→"Customer Service", Page13
14  Disposal
Find out here how to dispose of old appliances cor-
rectly.
14.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CE261114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CE261114 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CE261114

Gaggenau CE261114 User Manual - German, Dutch, French, Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info