761868
10
Zoom out
Zoom in
Previous page
1/16
Next page
en Wipe protection
10
10  Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
10.1 Activating wipe protection
Touch .
aA signal will sound.
aThe indicator lamp above lights up.
aThe control panel is locked for 30seconds.
11  Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
play
Selection
Automatic childproof lock
– Switched off1
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.1
Automatic timer
- Switched off.1
⁠- - Cooking time after which the hotplates
switch off.
Duration of the timer end signal
– 10seconds.1
– 30seconds.
– 1minute.
Activation of the heating elements
– Switched off
– Switched on
– The last setting before switching off the
hotplate.1
Time for selecting hotplates
– Unlimited: The last hotplate selected can
always be adjusted without having to select it
again.1
– You can adjust the last hotplate selected
within 10seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
1Factory setting
Dis-
play
Selection
Resetting to the factory settings
– Switched off.1
– Switched on.
1Factory setting
11.2 Changing basic settings
Requirement:The hob is switched off.
1. Switch on the hob.
2. Within the next 10seconds press and hold for
approx. 4seconds.
a and flash alternately on the left-hand display.
a lights up on the right-hand display.
3. Touch repeatedly until the required indicator ap-
pears on the left-hand display.
4. Set the required value on the control panel.
5. Press and hold for 4seconds.
aThe setting is activated.
Tip:To exit the basic settings, switch off the hob using
. Switch the hob on again and reset.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CE261114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CE261114 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CE261114

Gaggenau CE261114 User Manual - German, Dutch, French, Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info