755791
15
Zoom out
Zoom in
Previous page
1/56
Next page
14
en Before using for the first time
K
Before using for the first time
Before using for the f i rst time
In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled ~ "Important
safety information" on page 5.
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30seconds. The "Initial settings"
menu will then appear automatically.
You can change the settings at any time in the basic
settings.
Setting the language
The preset language appears in the display.
1Turn the rotary selector to select the required
display language.
2Confirm with .
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1Use the rotary selector to select the desired format.
2Confirm with .
Setting the clock
The time is shown in the display.
1Set the desired time using the rotary selector.
2Confirm with .
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1Use the rotary selector to select the desired format.
2Confirm with .
Setting the date
The preset date appears in the display. The day setting
is already active.
1Set the day using the rotary selector.
2Touch the C symbol to switch to the month setting.
3Set the month using the rotary selector.
4Touch the C symbol to switch to the year setting.
5Set the year using the rotary selector.
6Confirm with .
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1Use the rotary selector to select the unit you
require.
2Confirm with .
Setting the water filter
"Water filter" appears on the display. "Available "is set
by default.
If the water hardness exceeds 7°dH or the carbonate
hardness exceeds 5°dH, we recommend that you use
the descaling system GF 111100.
1Use the rotary selector to select either "Available"
(with water filter) or "Not available" (without water
filter).
2Press to confirm.
3If water filter "Available "was selected:
"Water filter capacity" appears on the display.
4Use the rotary selector to select the capacity of the
water filter used (100–9000litres). Observe the
information supplied with the water filter.
5Press to confirm.
Setting the water hardness
"Water hardness" appears on the display.
Note: The water hardness display only appears if "Water
filter - Not available" is selected.
1Use the enclosed carbonate hardness test to check
the tap water: Fill the measurement tubing up to the
5ml fill mark with tap water.
2Add the indicator solution drop by drop until the
colour changes from purple to yellow.
Important: Count the drops and carefully turn the
measuring tubing after every single drop until the
solution is thoroughly mixed in. The number of
droplets corresponds to the water hardness.
15
Water filter en
3Using the rotary selector, set the measured water
hardness. The value 12is set by default.
4Press to confirm.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with .
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Grease filter
Hook the enclosed grease filter onto the two bolts on
the back wall of the cooking compartment. Ensure that
you do not scratch the back wall when doing so.
Leave the grease filter in the cooking compartment for
all applications. Clean the grease filter with hot soapy
water or in the dishwasher every time heavy dirt
deposits have been left behind after cooking.
Cleaning the door panel
The door seal has been greased in the factory to make it
leaktight. There may be traces of grease left on the door
panel.
Clean the door panel with glass cleaner and a window
cloth or microfibre cloth before using the appliance for
the first time. Do not use glass scrapers.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.
Heating up the appliance
Make sure that there is no leftover packaging in the
cooking compartment.
To eliminate the new-appliance smell, heat up the empty
appliance with the door closed. One hour with hot air H
+ 60% humidity at 200 °C is ideal for this.
+
Water filter
Water filter
Operation with or without a water
filter
You can use the appliance with or without a water filter.
If the water hardness exceeds 7°dH or carbonate
hardness 5°dH, we recommend the installation of the
descaling system GF 111 100.
Changing the water filter
Filter cartridges should be replaced regularly.
Replacement cartridges are available from after-sales
service or in the online shop (order number
GF 121 110).
The capacity of the filter cartridge depends on the
frequency of use of the appliance and your regional
water hardness. A message will appear in the display to
remind you when the filter needs to be replaced.
Regardless of the actual amount of water filtered the
filter cartridge needs to be changed after 12 months at
the latest.
1Set the function selector to S. Select "Water filter
change" using the rotary selector.
2The œ symbol is displayed. Confirm with .
3Change the water filter cartridge. Refer to the
instructions included with the filter cartridge.
Confirm with .
4"Water filter capacity" is shown in the display.
Confirm with .
5Turn the rotary selector to select the capacity of the
filter cartridge (between 100- 9000 litres). Confirm
with .
The water filter change is complete. Confirm with .
The appliance is now ready for operation.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BSP261101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BSP261101 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BSP261101

Gaggenau BSP261101 User Manual - German - 56 pages

Gaggenau BSP261101 User Manual - Dutch - 60 pages

Gaggenau BSP261101 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info