761914
31
Zoom out
Zoom in
Previous page
1/112
Next page
HomeConnect  en
31
9  HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
To be able to use HomeConnect, you must first set up
the connection to the WLAN home network (Wi-Fi1) and
to the HomeConnect app.
¡Automatically connecting appliance to WLAN home
network (Wi-Fi) →Page31
¡Connecting appliance to WLAN home network (Wi-
Fi) manually →Page31
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tips
¡Please consult the documents supplied by
HomeConnect.
¡Please also follow the instructions in the HomeCon-
nect app.
Notes
¡Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page24
¡Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡In networked standby mode, the appliance requires
a maximum of2W.
¡If you need your device's MAC address to connect
to your home network, you can find this next to the
rating plate →Page36 inside the appliance. To do
this, Remove the filter.
9.1 Automatically connecting the appliance
to the WLAN home network (Wi-Fi)
If your router has a WPS function, you can connect the
appliance to your WLAN home network (Wi-Fi) automat-
ically.
Note:The appliance cannot be switched on during the
connection process. Press to cancel the process.
Requirements
¡Wi-Fi on the router is activated.
¡The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
¡The HomeConnect app is installed on your mobile
device.
¡The appliance and the light are switched off.
1. Press and hold the button until LED7 flashes in
the LED display.
2. Press .
aLED1 and LED7 flash in the LED display.
3. Press the WPS button on the router within the next
2minutes.
aIf the connection has been established, the appli-
ance automatically connects to the HomeConnect
app. LED3 and LED7 flash in the LED display.
4. If no connection can be established, the appliance
automatically switches to the manual connection to
the home network, LED2 and LED7 flash in the
LED display. Log the appliance manually into the
home network or press in order to restart the lo-
gin.
5. On your mobile device, follow the instructions for
automatic network login.
aThe login process is complete when LED7 stops
flashing and remains continuously lit.
9.2 Manually connecting the appliance to
the WLAN home network (Wi-Fi)
Note:The appliance cannot be switched on during the
connection process. Press to cancel the process.
Requirement:The appliance and the light are switched
off.
1. Press and hold the button until LED7 flashes in
the LED display.
2. Press twice to start logging into your home net-
work manually.
aLED2 and LED7 flash in the LED display.
3. Follow the instructions in the app.
aIf the connection has been established, the appli-
ance automatically connects to the HomeConnect
app. LED3 and LED7 light up in the LED display.
4. On your mobile device, follow the instructions for
manually logging into your network.
aThe login process is complete when LED7 stops
flashing and remains continuously lit.
9.3 Connecting the appliance to the Home
Connect app
Requirements
¡The HomeConnect app is installed on your mobile
device.
¡The HomeConnect app is opened.
1. Press and hold the button until LED3 and LED7
flash in the LED display.
2. Follow the instructions for the HomeConnect app
on the mobile device.
aThe login process is complete when LED7 stops
flashing and remains continuously lit.
1Wi-Fi is a registered trademark of the Wi-Fi Alliance.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau AC270101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau AC270101 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 9,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info