Manual Fuxtec FX-SG7500B (page 34 of 87) (English, German, French, Italian)

781824

Zoom out

Zoom in

1/87

Original User Manual Generator FX-SG Series

− Allow the filter element to dry.

− Wet the filter element with acidic

engine oil.

− Squeeze excess engine oil out of

the filter insert.

◼ Replace the filter insert in the filter

housing and secure the filter insert by

fastening the filter cover with the

clamping straps.

Battery (optional) - FX-

SG7500B only

Mounting the battery

◼ Mount the battery (B) at the

designated location.

◼ Attach the battery to the support (D)

using the clamping plate (C),

mounting bolts (E), and nuts (A).

Connecting the battery

◼ Connect the positive wire (red) of the

generator with the electric starter to the

starter motor.

◼ Connect the ground connection

(black) to the back of the generator.

◼ Connect the generator's terminal with

the electric starter first to the battery's

positive terminal and then to the

negative terminal.

When disconnecting, remove the

connection from the negative

terminal first and only then from the

positive terminal.

Check electrolyte level

NOTE

Check that there is sufficient electrolyte in

the battery cells.

The electrolyte level must be between

the UPPER and LOWER markings.

◼ Top up electrolyte when the electrolyte

level is below the LOWER mark.

◼ After you have topped up the

electrolyte, wait 20-30 minutes.

NOTE

The generator cannot be started until this

time has elapsed.

Operation

WARNING!

Switch off the generator under the

following conditions:

− if the power generator is left

unattended for an extended period,

− before checking, cleaning, or other work

on the power generator,

− if the generator begins to vibrate

excessively.

Preparing for operation

CAUTION!

Ensure that no loads are connected to the

are connected to the 230 V and 400 v

sockets!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG7500B in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-SG7500B Manual

Product: