781824

Fuxtec FX-SG7500B Manual

33
Zoom out
Zoom in
Previous page
1/87
Next page
Original User Manual Generator FX-SG Series
32
Before commissioning
Check the power generator for completeness
of delivery and transport damage.
NOTE
Immediately report any damage to the
generator or defective or missing parts to
the supplier or manufacturer!
Scope of delivery
The scope of delivery includes
− Power generator set
− User manual
Inspection work
WARNING!
Before carrying out any work on
components, secure the power generator
on a flat, stable surface and protect it
against unauthorized switches.
CAUTION!
Do not start up the power generator until
you have carried out all the necessary
assembly, adjustment, and inspection
work on the power generator have been
carried out.
Checking the engine oil level
◼ Unscrew the oil filler cap together with
the oil dipstick from the filler neck and
pull it out. Clean the dipstick with a
clean cloth.
◼ Insert the dipstick into the oil filler
neck without screwing it in.
◼ If the oil level is below the lower limit
mark, fill the recommended oil up to the
upper limit mark.
◼ Screw the oil filler cap firmly back
onto the oil filler neck.
Filling up with fuel
DANGER!
Pay special attention to the safety
instructions in the chapter "Explosion and
fire hazard" as well as to the safety stickers
on the
generator!
◼ Unscrew the cap on the fuel tank.
◼ Check the filling level. If necessary, fill
the tank to a maximum of the upper
edge of the filter.
◼ Screw the fuel tank cap tightly back
onto the fuel tank nozzle.
Checking the air filter
◼ Loosen the clamping straps (Q) at
the top and bottom of the air filter
housing.
◼ Check the condition of the air filter;
replace the air filter if it is damaged.
◼ Clean the air filter if it is dirty as
follows:
− Wash the filter element in the
washing solution.
NOTE
The engine will not start if the engine oil
level is too low.
NOTE
Make sure that no oil flows next to it when
topping up engine oil. Wipe off leaks so- fort
with clean rag.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-SG7500B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG7500B in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info