781743
41
Zoom out
Zoom in
Previous page
1/87
Next page
Original-Bedienungsanleitung FUXTEC Laubbläser/-sauger FX-LB126/LBS126_de_en_fr_ita_rev07
41
36. Troubleshooting
Malfunction
Cause
Troubleshooting
The Engine does not start
1. Tank is empty
2. the engine is flooded
3. Spark plug dirty (carbon
residues on the electrodes),
electrode gap too large
4. Carburettor nozzles dirty
5. Damaged spark plug
connection
6. No ignition spark
1. Fill up with petrol
2. Remove gas, start several
times, remove spark plug if
necessary clean and dry the
spark plug
3. Clean spark plug, check
heat value of spark plug,
replace the spark plug if
necessary or adjust electrode
gap to 0.6mm 0.7mm
4. Clean carburettor
5. renew
6. Check on/off switch, check
cables, check the ignition
module, replace the ignition
module if necessary
Engine runs too fast at idle
Engine is cold
Slowly warm up, close choke
The engine does not give
maximum power
1. Spark plug dirty (carbon
residues on the electrodes),
electrode gap too large
2. Carburettor nozzles dirty
3. Dirty air filter
4. Exhaust is dirty
5. Seal in crankcase leaking
1. Clean spark plug, check
heat value of spark plug,
replace the spark plug if
necessary or adjust electrode
gap to 0.6mm 0.7mm
2. Clean carburettor
3. Clean air filter
4. Dismantle and clean the
exhaust pipe
5. renew
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-LB126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-LB126 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info