Manual Fuxtec FX-LB126 (page 39 of 87) (English, German, French, Italian)

781743

Zoom out

Zoom in

1/87

Original-Bedienungsanleitung FUXTEC Laubbläser/-sauger FX-LB126/LBS126_de_en_fr_ita_rev07

• if it has a damaged insulation body

• in case of heavy burn-up of the electrodes

• for very dirty or oily electrodes

• every month in regular operation

Use one of the following spark plugs:

Torch BMR6A

Check ignition sparks

1. Remove the spark plug connector from the spark plug

2. Unscrew the spark plug with the spark plug wrench provided.

3. Insert the spark plug connector firmly.

4. Press the spark plug against the engine casing (not near the spark plug hole) with insulated

pliers.

5. Slide the on / off switch to the "start" position.

6. Pull strongly the starting rope at the starting handle.

A spark must be visible between the electrodes if the system is functioning properly.

Muffler/outlet opening

Do not tighten the muffler screws when the engine is hot.

1. Check regularly that the screws (D) of the muffler have not become loose ➜ If they are loose,

hand-tighten them.

2. Regularly clean the outlet opening (E).

Care

Clean the device carefully after each use to ensure that it continues to function properly.

• Clean the housing with a soft brush or dry cloth.

Water, solvents and polishing agents must not be used.

• Make sure that the ventilation slots for cooling the engine remain free (danger of

overheating).

• Clean and oil all moving parts regularly.

Do not use grease! Use environmentally friendly oil.

Warning: failure to carry out maintenance regularly can cause serious damage to the device and

persons.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-LB126 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-LB126 Manual

Product: