781784

Fuxtec FX-E1SBS20 Manual

23
Zoom out
Zoom in
Previous page
1/51
Next page
Original User Manual FUXTEC 20V cordless hammer drill FX-E1SBS20 +
FUXTEC 20V cordless screwdriver FX-E1BS20
7
During use
Do not switch on the device when persons (especially children) or animals are in the immediate
vicinity. Make sure that children do not play with the device.
Make sure that you have a firm stance and work calmly and carefully. Depending on the material
(wood, metal, brick, plaster, etc.) to be worked on, use the screws and attachments provided.
Incorrect selection can lead to slipping and injury. Wear hearing protection when hammer drilling.
Exposure to noise can lead to hearing loss. Hold the power tool by the insulated grip surfaces.
When performing your work, you may come into contact with concealed wires and may be exposed
to electric shock if you do not hold the drill properly.
After use
Switch off the device and remove the battery from the screwdriver. Then place the unit in a safe
place.
Do not store the device within the reach of children. Make sure that the ventilation slots in the
device are clean.
Please do not clean any dirt with water. This may damage the electrical device.
Safety information for the charger
- Keep the charger away from rain or moisture. Water entering a charger increases the risk of electric
shock.
- Keep the charger clean. Soiling increases the risk of electric shock.
- Check the charger, cable and plug before each use. Do not use the charger if you notice any
damage. Do not open the charger yourself and have it repaired only by qualified personnel and only
with original spare parts.
Damaged chargers, cables and plugs increase the risk of electric shock.
- Do not place any objects on the charger or place it on soft surfaces. This creates a fire hazard.
- Always check that the mains voltage corresponds to the voltage indicated on the charger's rating
plate.
- Never use the charger if the cable, plug or the device itself is damaged by external influences. Take
the charger to the nearest specialist workshop.
- Never open the charger. In the event of a fault, take it to a specialist workshop.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1SBS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1SBS20 in the language / languages: English, German, French as an attachment in your email.

The manual is 1.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info