781784

Fuxtec FX-E1SBS20 Manual

21
Zoom out
Zoom in
Previous page
1/51
Next page
Original User Manual FUXTEC 20V cordless hammer drill FX-E1SBS20 +
FUXTEC 20V cordless screwdriver FX-E1BS20
5
Use and handling of the power tool
- Do not overload the device. Be sure to use the designated power tool for your work. With the right
power tool you will work better and safer in the specified power range.
- Do not use a power tool whose switch is defective. A power tool that cannot be switched on or off
is dangerous and must be repaired.
- Unplug the power cord and/or remove the battery before making adjustments to the device,
changing accessories or putting the device away. This precaution prevents the power tool from
starting accidentally.
- Keep unused power tools out of the reach of children. Do not have the device used by persons who
are not familiar with it or who do not follow these instructions or have not read it. Power tools are
dangerous if they are used by inexperienced persons.
- Maintain power tools with proper care. Check that moving parts function properly and do not jam,
that parts are not broken or damaged in such a way that the function of the of a power tool is
impaired. Have damaged parts repaired before operation of the device. Many accidents are caused
by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges jam
less and are easier to guide.
- Be sure to use power tools, accessories, insert tools, etc. according to these instructions. Take into
account the working conditions and the task to be performed. The use of power tools for
applications other than those intended can lead to dangerous situations.
Use and handling of the battery tool
- Charge the batteries only with chargers recommended by the manufacturer. Using a charger that is
suitable for a specific type of battery creates a fire hazard when used with other batteries.
- Only use the rechargeable batteries in power tools that are designed for this purpose. Use of other
batteries may cause injury and a fire hazard.
- Keep the unused battery away from paper clips, coins, keys, nails, screws, or other small metal
objects that could cause the contacts to bridge. A short circuit between the battery contacts may
cause burns or fire.
- Liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of accidental
contact, rinse with water. If the liquid gets into your eyes, seek additional medical attention. Leaking
battery fluid may cause skin irritation or burns.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1SBS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1SBS20 in the language / languages: English, German, French as an attachment in your email.

The manual is 1.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info