781794
18
Zoom out
Zoom in
Previous page
1/34
Next page
Original User Manual FUXTEC 20V cordless heat gun FX-E1HLP20
7
- Always ensure good ventilation, as toxic fumes can be produced under the influence of the heat.
- Never use this heat gun as a 'hair dryer'!
- Neither the air inlet nor the air outlet must be blocked as this would generate extreme heat which
could damage the fan.
- Never point hot air at people or animals!
- Never touch the metal nozzle during or shortly after operation! It becomes extremely hot and
needs up to 30 minutes to cool down.
- Carefully avoid contact of the hot nozzle with other objects!
- Do not insert any objects into the nozzle! There is a risk of electric shock. Never look into the nozzle
while the appliance is in operation.
- Paints / varnishes must not stick to the nozzle or the spatula attachment! They could ignite after
some time.
- Hold this tool with ONE hand only. Never place your second hand over the ventilation slits!
- When mounting or dismounting the nozzle attachments or making adjustments, the battery must
always be removed first.
After use
Switch off the unit and remove the battery from the gun. Then place the unit in a safe place and let it
cool down before storing it permanently.
Do not store the device within the reach of children. Make sure that the ventilation slots in the unit
are clean.
Please do not clean dirt with water. This may damage the electrical device.
Safety information for the charger
- Keep the charger away from rain or moisture. Water entering a charger increases the risk of electric
shock.
- Keep the charger clean. Soiling increases the risk of electric shock.
- Check the charger, cable and plug before each use. Do not use the charger if you notice any
damage. Do not open the charger yourself and have it repaired by qualified personnel using only
original spare parts.
Damaged chargers, cables and plugs increase the risk of electric shock.
- Do not place any objects on the charger or place it on soft surfaces. This could result in a fire
hazard.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1HLP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1HLP20 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info