781794

Fuxtec FX-E1HLP20 Manual

17
Zoom out
Zoom in
Previous page
1/34
Next page
Original User Manual FUXTEC 20V cordless heat gun FX-E1HLP20
6
- Turn off the device and remove the battery in the following conditions:
• if the device is left unattended;
• before checking, cleaning or other work on the device;
• if the device starts to vibrate excessively.
Before use
- Familiarise yourself with the device and its functions and controls before starting work.
- Check the device for signs of wear or damage before starting up and after a collision.
- Do not use device whose switch is defective and can no longer be switched on or off.
- Never use device with damaged or missing parts. Have them repaired or, if necessary, replaced by a
qualified technician or specialist workshop.
- Always wear appropriate personal protective device (safety goggles, hearing protection, non-slip
work gloves, etc.) when working with or on the device. Wearing personal protective device reduces
the risk of injury.
During use
The heat gun may only be used by those who have thoroughly familiarized themselves with it. All
users must know the function and operation of this tool, but also its limitations and possible dangers.
This will greatly reduce the risk of electric shock, fire and serious injury.
- Remove all packing materials and, if necessary, the transport locks. Keep packaging materials away
from children - danger of suffocation!
- Never place your hands over the ventilation slots or block the ventilation slots in any other way.
- The nozzle and the attachments become very hot! It is essential to let them cool down before
touching them!
- The heat gun must be switched off before it can be put down.
- Never leave switched on tools unattended!
- This product can cause fires if not handled with extreme care!
- Heat can also be transferred to flammable objects that are not immediately obvious.
- DO NOT use the heat gun when flammable gases may be present in the air or near flammable
materials.
- The heat gun must cool down before it can be packed away!
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-E1HLP20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-E1HLP20 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info