Attach the plant guard
◼
Insert the plant guard into the holes of
motor housing
Adjustments before using
WARNING!
Before performing any work on the garden
tool, remove the battery.
Set the shaft length
Adjust the trimmer length to the height of the
user.
◼
Loosen the threaded sleeve on the shaft
coupling (
Œ.
)
.
◼
Extend the lower shaft until the ideal
handle length is reached (
œ.
).
◼
Tighten the threaded sleeve (
3.
).
Set the handlebar
Adjust the handlebar to the height of the
user.
◼
Loosen the locking lever on the
handlebar (
Œ.
).
◼
Set the handlebar to the required
position (
œ.
).
◼
Secure the handlebar by folding down
the locking lever
.
Set the operating angle
Five operating angles can be adjusted on
the lawn trimmer. This allows you to easily
reach places in the garden which are
problematic and difficult to access.
The cutting head should always be parallel
to the ground.
◼
Press the locking button (
Œ.
).
◼
Set the required operating angle (
œ.
).
◼
Release the locking button.
Plant guard
The plant guard protects shrubs, trees and
bedding plants.
The plant guard can be folded up when it is
not needed.
