Instructions for use
WARNING!
Switch the unit off and remove the battery
under the following conditions:
–
if the unit is left unattended;
–
before checking, cleaning or performing
other work on the unit;
–
if the unit starts vibrating excessively.
Before initial operation
Unpack the garden tool and accessories
and check that no parts are missing or
damaged.
NOTE
The batteries (optional; depending on
delivery scope) are not fully charged on
delivery. Prior to initial operation, charge
the batteries fully. See user manual of the
battery charger.
Assembling
WARNING!
Before performing any work on the garden
tool, remove the battery.
Installing the guard
CAUTION!
Never operate the trimmer with missing or
broken guard or without guard in position.
◼
Loosen and remove the 4 screws from
the underside of motor housing.
◼
Place the guard on the motor
housing (
Œ.
) and align the bores
vertically.
◼
Screw in the 4 screws and tighten (
œ.
).
Attach the running wheel
◼
Insert the running wheel into the holder
on the left side of motor housing and
press, until it clicks.
◼
To dismantle, the retaining tab may be
opended with a suitable tool.
Assembling and adjusting the
shoulder belt
◼
Open retaining hook and hook onto the
fastening eye on the housing.
◼
Adjust the shoulder belt to your height.
