566460
61
Zoom out
Zoom in
Previous page
1/94
Next page
61

bind at the top or bottom of its throw. You will also want to repeat this procedure for the cyclic throws.
Move the stick left/right, up/down to assure that the linkages do not bind. If the linkages are binding, reduce
the AFR values. If additional throws are needed, increase the values.
To set the swash AFR:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode.
3) Press either the MODE key OR the END key to scroll through the function menus. Continue pressing the
MODE or END key until the swash (SWSH) menu appears on screen.
4) To select the swashplate type, press the DATA INPUT lever upward or downward for about two seconds.


5) Use the SELECT key to select the channel you wanted to set. Aileron channel

adjusted by pushing the DATA INPUT lever up or down. Aileron movement can be

6) Adjust the elevator and pitch channels using the same methodology. Press the SELECT button to bring
forth the channels accordingly. The elevator channel is indicated by CH-E; pitch is indicated as CH-P on
the display.
7) Press and hold the END button to exit the programming menu.
Delay (DELY)- (HELI only)
The T6J allows the user to delay input from the throttle and/or pitch servos when changing from the other
   
 



The delay for both the throttle (Channel 3) and the pitch (Channel 6) is adjustable from 0-50%. A delay
value of 50% is approximately 1.2 seconds. We suggest starting with a smaller value until the optimum

61


Need help? Post your question in this forum.

Forumrules
1

Forum

futaba-t6j---2.4ghz

Reset search

  • Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T6J - 2.4GHz at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info