Manual Futaba T6J - 2.4GHz (page 60 of 94) (English)

566460

Zoom out

Zoom in

1/94

To select the swashplate types:

1) Turn the transmitter on.

2) Press and hold the MODE button to access the programming mode.

3) Press either the MODE key OR the END key to scroll through the function menus.

Continue pressing the MODE or END key until the swash (SWSH) menu appears on

screen.

4) To select the swashplate type, press the DATA INPUT lever upward or downward for about two seconds.





5) Press and hold the END button to exit the programming menu.

Swashplate AFR (Adjustable Function Rate) - (HELI only)

If any of the three CCPM Swashplate types (H3, HE3, or HR3) have been selected, the Swashplate AFR

(adjustable function rate) settings will automatically be activated as well. It is possible to individually

modify the values for the aileron, elevator and pitch servos to fine-tune the amount of travel and travel

direction of the swashplate inputs.

Prior to adjusting the swashplate AFR, it is important to properly set the linkage and servo horns for the



geometry of these settings is imperative to a smooth, successful and correctly set-up CCPM helicopter.

Collective and pitch directions, as well as overall throw (all three servos working together) are controlled by

the Swash AFR. To begin, set up it is recommended that the pitch curve be set in a straight line (0, 25, 50, 75

and 100), this will be set to the correct curves as shown in the Pitch Curve section on page

??. Initially the



Check all three servos to move in the same direction by the throttle stick operation. At this point, it doesn't

worry even if the swashplate works in the reverse direction for the stick operation. If one of these servos

operate oppositely for other servos, you will need to change the travel direction of the servo in the servo

reversing (REVR) menu. Please refer to page

?? for information on how to do so.

Next, check the cyclic directions (aileron and elevator) and the collective (pitch) direction. If the swashplate

is working in the reverse direction for each stick operation, it will be necessary to change the respective

swashplate AFR value to -50%.

With everything functioning in the proper direction it is time to adjust the overall throw for each function.

Typically you will use a pitch gauge to assist in the adjustment of the pitch AFR to achieve the amount of

Sorry my bad english, did you have the manual in spanish? Submitted on 6-10-2021 at 05:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T6J - 2.4GHz in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba T6J - 2.4GHz Manual

Product: