520093
33
Zoom out
Zoom in
Previous page
1/127
Next page
33
<Functions of System Menu>
LCD contrast adjustment
1. Adjust the LCD contrast with the left and right
side buttons.
*When the right side button is pressed, the LCD contrast
decreases. When the left side button is pressed, the LCD
contrast increases.
Auto power off time setting
1. Adjust the auto power off time with the left
and right side buttons.
*When the time the transmitter is inactive exceeds the set
time, the power is turned off automatically. This time can be
set up to 1 hour in 10 minutes increments. The auto power
off function can also be deactivated.
Backlighting brightness adjustment
1. Adjust the backlighting brightness with the
left and right side buttons.
*When the right side button is touched, the backlighting
becomes brighter. When the left side button is touched, the
backlighting becomes darker.
Backlighting off time setting
1. Adjust the backlighting off time with the left
and right side buttons.
*When the time the transmitter is inactive exceeds the set
time, the backlighting is automatically turned off. This time
can be set up to 10 minutes in 10 second increments. The
backlighting off function can also be deactivated.
Display
LCD screen adjustment and auto power off setting
The following LCD screen adjustments and auto
power off setting are possible:
● Contrast adjustment
● Auto power off time setting
● Backlighting brightness adjustment
● Background color change
● Touch panel screen position correction
Touch the [Display] button in the System Menu to
call the setup screen shown below.
●Return to System Menu
*Since the backlighting power consumption is extremely
high, we recommend that the backlighting off time be made
short for long use.
Background color
1. Touch the button of the color you want to
change.
*There are four background colors.
Touch panel screen position correction
This function adjusts the position of the touch
panel.
1. Touch the [Col.] button and then press [Yes].
The Calibration screen appears.
2
. Using a stylus pen, touch the center of the
crosshairs on the screen. (About 2 seconds)
When the system recognizes that position,
the cursor immediately moves to the next
position. Repeat this operation until the
crosshairs disappear. (The crosshairs appear
in center upper left →lower left →upper
right →lower right order.)
3
. After the crosshairs disappear, touch
anywhere on the screen. This ends calibration
and returns to the original screen.
*Normally this calibration is unnecessary. Perform this
calibration when the touch panel has deviated after long use.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info